Official Creality 3D Printer Ender 3 Upgraded Silent Board Motherboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3/ Ender 3 V2/ Ender 3 Pro/Ender 3 Max/Ender 5
Creality 3D
177 ratings
More info
2
Product Features
- 【Super Quiet】The silent mainboard can reduce stepper motor noise. TMC ultra-quiet motor drive chip, ultra-quiet system design, so that the machine is always running at low decibels (<50dB).
- 【Widely Application】Compatible with Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 MAX, Ender 5,Ender 5 Pro 3D printer. PLEASE NOTICE: It only plug and play for Ender-3. If you want to install it on other machine, please flash the relative machine V4.2.7 firmware. You can download firmware from official website.
- 【Driver】TMC2225 driver & V0.0.6 firmware from Creality ( based on Marlin 2.0.1) for V4.2.7 board. The bootloader has been preinstalled.
- 【Update Firmware Method】Please copy the correct firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
- 【After Sale Service】Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical supports for you within 24 hours.
Creality Ender 3 v2 New Motherboard Silent Mainboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3 v2/ Ender 3/ Ender 3 Pro/Ender 5 3D Printer
Sovol 3D
155 ratings
More info
3
Product Features
- Super Quiet. Compatible with Creality Ender 3 v2, Ender 3 Pro, Ender 3, Ender 5 3D printer. PLEASE NOTICE: It only plug and play for Ender-3 v2. If you want to install it on Ender-5, please flash Ender-5 firmware. You can download firmware from Official website.
- Driver - TMC2225 driver & Creality V0.0.6 firmware ( based on Marlin 2.0.1) for V4.2.7 board. Bootloader has been preinstalled.
- Update Firmware - Please copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
- Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve the Heating Problem.
- Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical supports for you as soon as we can.
BIGTREETECH SKR 3 EZ Mainboard Silent Motherboard 48V High Speed Printing Support Marlin &Klipper Firmware Compatible with EZ2209 EZ5160 TMC5160 TMC2209 Driver for 3D Printer DIY Control Board
BIQU
29 ratings
More info
4
Product Features
- ☆【48V High Speed Printing】Motor voltage of SKR 3 EZ varies from 12V to 48V (need to use EZ5160 Pro driver for 48V) while SKR 3 varies from DC 12V to 24V. Higher voltage can extremely improve your printing speed and you can adjust it with a jumper cap. What's more, SKR 3 owns 2 normal fans, and the EZ version owns 3 normal fans, which can ensure the smooth operation of your printer and advance your printing quality.
- ☆【Safe Anti-misplugging Design】Wrong installation of drivers will not only cause damage to the drivers itself but even ruin the motherboard or catch fire. And according to our survey, 40% Users may misplug the drivers unintentionally. Our new arrivals SKR 3 EZ motherboard and EZ series drivers, featuring an unprecedented anti-misplugging design, can totally remove such hidden dangers to offer you a better and safer printing experience! (Traditional TMC drivers is still compatible.)
- ☆【Updates of Processor】The new processor of SKR 3 EZ controller is upgraded to 32-bit 480MHz ARM Cortex-M7 series STM32H743VI, with which the running speed and printing accuracy of SKR 3 controller is greatly increased by 30%+ while its working noise become lower. Its upgraded thermistor supports PT1000, exempting the need of external module.
- ☆【DIY Friendly Interfaces】BOOT0 is added for programming firmware in DFU mode. WIFI module (ESP-12S, ESP-07S, ESP32) is reserved. SKR 3 EZ motherboard also supports bltouch, resume printing function, RGB lights, blocking detection and shutdown after printing function. What’s more, it’s also compatible with TFT35 E3 V3.0/TFT35 V3.0/TFT28 V3.0/12864 LCD display as well as EZ2209/EZ2208/EZ5160, TMC2209/TMC2208/ TMC5150/DRV8825 stepper motor drivers.
- ☆【About Firmware】SKR 3 EZ silent board compatible with three firmware Marlin, Klipper and RepRap, which are widely used in the 3D printing world. Firstly download firmware on GitHub website of name “firmware.bin”, copy and save it to SD card, firmware must bed reserved, then re-plug the SD card and wait to 10s. When the status indicator stops flashing and the file name in the SD card is renamed to “FIRMWARE.CUR” then update successfully. Note: Our control board come without SD card.
Creality New Upgraded Ender 3 Motherboard 32 Bit Silent Mainboard V4.2.7 + 24V 4010 Axial Cooling Fan for Motherboard, 3D Printer Silent Mainboard with TMC2208 Driver for Ender 3/Ender 3 Pro/Ender 5
Lokkr
15 ratings
More info
5
Product Features
- Upgrade Replacement: This is the newest version of Creality's 4.2.7 32 Bit silent control board with original TMC2225 Trinamic stepper drivers which greatly reduce the sound of the stepper motors during use. This new 32Bit version has more memory to store more functions and features of Marlin firmware like thermal runaway protection, resume print, and many others.
- Thermal Runaway Protection: Optimized circuit, enabling thermal runaway protection to effectively solve heating problems.
- Eeay to Operate: With USB Port, can be Worked With E/Z/Y/X Axis Motor.
- Comes with a Fan: 4010 Axial Cooling Fan 24V 7000r/min，L150mm with 2.5 Terminal fit for all ender series.
- Note: It has the free unified firmware preconfigured for Ender-3. If you wanna install this board to Ender-3 Pro /Ender-5, you will need to flash the firmware. If you do not have the firmware please contact us!
Official Creality 3D Ender 3 Pro Silent Motherboard V4.2.7 Upgrade Mute Mainboard with TMC2225 Driver for Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5
Creality 3D
269 ratings
More info
6
Product Features
- New Upgraded V4.2.7 Motherboard Compatible with Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5. NOTE: It only preinstalls the Ender 3 Pro firmware, if you want to install it in your Ender 3, Ender 5 or Ender 3 V2, need to flash the Ender 3 / Ender-5/Ender 3 V2 firmware.If you need the firmware, please contact us freely. Ender-3 / Ender-3 Pro/ Ender 5 use the same mainboard but different firmware, please select the type you need. For Ender 3 Pro, You just plug and install them in and start operate!
- New Upgrades: The microcontroller is upgraded from 8-bit to 32-bit, the running speed is obviously accelerated; the noise is lower and the precision is higher. Increase material breakage detection and automatic leveling function.
- Driver: TMC2208 driver & Marlin 1.1.9 for V1.1.5 mainboard while TMC2225 driver & Marlin 2.0.1 for V4.2.7 mainboard. Bootloader preinstalled on both version boards.
- Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve the Heating Problem. Eeay to Operate: With USB Port,can be Worked With E/Z/Y/X Axis Motor. Voltage: Support 24V input voltage.
- Update Firmware: If the board you received is V1.1.5 please flash firmware with ISP cable. If the board you received is V4.2.7, please copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
BCZAMD 3PCS NTC 3950 100K Thermistor with 1 Meter Wiring for EinsyRambo Mainboard Prus i3 MK2S/MK3 3D Printer Heatbed or Hot End Imdinnog
Aimengda
61 ratings
More info
7
Product Features
- This thermistor head is designed for the Prus i3 MK2S/MK3 3D printer.
- Wire length:1m/39.37 inches, the connector is 2pin XH2.54.
- Temperature sensor 100KΩ Accuracy ± 1%，NTC 3950 100K thermistor is able to measure the temperature.
- For use on heated bed or extruder hot end, use 1 meter of high temperature PTFE insulated wiring for easy pre-wiring.
- Connector is specially designed for MK3 controller main board, so please check before ordering.
BIGTREETECH SKR Mini E3 V3.0 32Bit Control Board with TMC2209 UART Stepper Driver New Upgrade 3D Printer Silent Board for Ender 3, Ender3 Pro, Ender 3 V2 3D Printer
BIGTREETECH
1982 ratings
More info
8
Product Features
- 🔥Main Control Chip: Adopt STMicroelectronics' latest G0 series main control chip STM32G0B1RET6;
- 🔥Three CNC Fan: Increase the heat dissipation controllable fan to reduce the printer temperature when the device is working;
- 🔥Increased Heat Sink: Redesign the drive heat sink, strengthen the drive heat dissipation capacity, and greatly improve the heat dissipation performance;
- 🔥USB Micro B: The PC communication USB interface is upgraded from Mini USB to Micro USB B, which is more adaptable;
- 🔥Output Power Supply: Increase SPI output port +3.3V power supply, external SPI sensor power supply voltage +3.3V and +5V are optional, support the motherboard to directly supply power to peripherals.
CREALITY Official Ender 3 V2 3D Printer with MeanWell Power Supply Upgraded Version of Ender 3 Pro Silent Motherboard Mainboard for Carborundum Glass Platform LCD Screen Printing Size 8.6x8.6x9.8in
Creality 3D
612 ratings
More info
9
Product Features
- V4.2.2 UPDATED SILENT MOTHERBOARD: Creality Ender 3 V2 3D printer update the motherboard with silent TMC2208 stepper drivers: Compared to the Ender 3 and Ender 3 pro, a V2 design that delivers users out-of-the-box experience and silence-oriented upgrades,It has been built to offer a beefy level of power, featuring an ARM Cortex-M3 STM32F103 CPU and a TMC2208 stepper drivers
- NEW UI & 4.3 INCH COLOR SCREEN: The ender-3 v2 use new display equipped with UI LCD screen, user experience greatly upgrades with the newly designed operation UI system, convenient disassembly and simple operation.
- UL CERTIFIED MEANWELL POWER SUPPLY: Creality 3D printer equipped with well-known brand MeanWell power supply to heat up quickly and let users choose between power voltage of 115V or 230V, Meanwhile the ender 3 v2 has been shielded by its power supply from voltage spikes and power outages. If there is a electrical power failure or outage suddenly , printers can resume printing from the last layer, saving time and reducing waste.
- SMART ADD-ONS: Designed with the sleek(discretely hidden power supply); the nice blue extruder knob (easy filament feeding and filament changes); A tiny tool drawer (keep tools, spare nozzles and other handy items in); improved belt tensioners, Ender 3 V2 provides much more convenience to shape out your imagination.
- CARBORUNDUM GLASS PLATFORM: The carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.With the latest Creality Ender 3 V2 3d printer, you no longer have to buy this upgrade because the printer comes with it as standard.
- 80% PRE-INSTALLED, EASY TO BE USED: Simple assembly with 80% pre-installed. Convenient and time saving.
- HUMANIZED DESIGN, SATISFIED EXPERIENCE: Humanized design with XY-axis tensioner for belt’s tightness adjustment and rotary knob for convenient filament feeding.
- TAKE OUT THE MODEL IN AN EASIER WAY: Carborundum glass platform with good thermal conductivity. Good adhesion and easy to take out the model.
- RESUMED PRINTING, SAVE TIME AND FILAMENT: Support resume printing and accurately record the printing data. No worry about sudden outage.
- INTEGRATED STRUCTURE DESIGN: Creality FDM 3D printer Ender-3 V2 for home use have all-metal integrated design with smooth motion. Quality and high precision printing.
ANYCUBIC Vyper, Upgrade Intelligent Auto Leveling 3D Printer with TMC2209 32-bit Silent Mainboard, Removable Magnetic Platform, Large 3D Printers with 9.6" x 9.6" x 10.2" Printing Size
ANYCUBIC
912 ratings
More info
10
Product Features
- Upgrade Auto Leveling: ANYCUBIC Vyper is one of the very few 3D printers that has auto leveling feature, the intelligent leveling system equipped with 16-point precise pressure strain gauge, which can adjust the uneven hotbed automatically, greatly simplifies your print preparation and improves your print success rate.
- Large Printing Size: ANYCUBIC Vyper 3D Printer comes with a large build volume of 9.6"(L) x 9.6"(W) x 10.2"(H) / 24.5 x 24.5 x 26cm, which leaves enough space and freedom to fully realize your fantastic creativity.
- Fast and Stable Printing: Compared with ordinary 3D printers, Vyper's max printing speed can reach 7.1 in/s / 18 cm/s, which save more time on waiting. High-precision double screw design makes printers run more stable operation and the patented Z-axis can avoid print layer marks, greatly improving the printing details and precision.
- Durable and Removable Magnetic Platform: ANYCUBIC Vyper's platform adopts a special coating combined with spring steel, you can remove the models easily with your bare hands simply by taking off the entire platform and then bend it. it can remain flat for decades, beside it's rust-proof and completely maintenance-free.Widely compatible with PLA/ABS/PETG/TPU filaments.
- Intelligent Resume Printing Function: Vyper 3D Printer supports automatically resume printing when Power off or the filament is insufficient or breakage, the sensor will pause printing to save time and avoiding material waste. More functions like double fan two-way heat dissipation, 4.3" LCD screen, Fast assemble, which greatly improved printing experience.
