HICTOP Flexible Steel Platform with PEI Surface and Magnetic Bottom Sheet with Adhesive 235x235mm for Ender-3 Pro, Ender-3 V2，Ender-3 3D PrintersHICTOP
1228 ratingsMore info 1
- The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied.
- The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed.
- Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃
- Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
- The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and similarly sized machines.
SUNLU Magnetic Build Surface, Good Adhesion, 3pcs Flexible Removable Build Platforms for 3D Printers Ender 3 5 T3, Heated Bed Cover, 9.25x9.25inchs (235x235mm), 2 Coating Surface+1 Base Sticker SheetSUNLU
28 ratingsMore info 2
- Please double-check before attaching the base plate sheet: Stick half of sticker base sheet with coating surface sheet and lift it up. It is correct if both sheets can be lifted at the same time. If the two sheets can't be lifted at the same time, please rotate one of them 90°.
- ①【Easy to Install】The magnetic plate is very easy to install. The sticker base sheet has a good adhesive on the back side, just paste the base sheet to the printer heated bed, and then put the coating surface sheet on the base sheet, ready to print.
- ②【Good Adhesion】The magnetic built surface has a special coating layer, which makes the filaments can stick to the printed bed easily and reduces warping.
- ③【Easy to Remove】The magnetic build plate is removable and flexible, just gently bend the print surface, remove the 3D printing model easily.
- ④【Fast Heat Conduction】The thermal conductivity of SUNLU magnetic build plate is very good, which can speed up the heating rate, and reduce printing waiting time.
- ⑤【Heating Range】The heating range is 0-100 degrees, which is compatible with most FDM 3D printer filaments. PLA、PLA Plus、TPU、ABS、PETG、ASA、Nylon、Others.
- ⑥【Packing List (3PCS)】SUNLU 3D Printer Magnetic Build Plate. 3 pieces sheet in total: 2 pieces of coating surface sheets and 1 piece of sticker base sheet.
FYSETC 3D Printer Platform CR10 S4 Anycubi Chiron Flexible Spring Steel Sheet 410x410mm/16.2x16.2in Double Sided Textured Pei Powder Bed Cover Gold with Magnetic Base Compatible with Vorn Core XYFuyuansheng
8 ratingsMore info 3
- Upgrade Spring Steel Sheet, Gold, Both sides can be used. Flexible, removable, can stick to magnetics very well. High strength and heat resistance. Comes with a soft magnetic base.
- Size: 410 x 410mm/16.14", compatible with Crealty CR10 S4, RepRap X400, Raptor, T-REX and 2+ , T-Rex 3.0 and Raptor 2, Anycubi Chiron, Vorn Core XY or other same size hotbed/build plate. Not work with Anycubi Kobrra Max(429x410mm) !!!Please re-measure your build plate before ordering, Not rely on the build volume/printing size. If can accept the deviation 5-10mm against your heat bed, just buy it.
- Two-in-one type of PEI powder coated hardended steel spring sheet, not easy to get deformed. It behaves as most PEI sheets would and works great with PLA, TPU, PETG, ABS, as well as many other filaments. If you need more adhesion for tough-to-stick filaments like Nylon, feel free to use glue sticks, they will wash off with water after use.
- Easy to install, take off the back paper on the magnetic base, stick it to the heated bed, then align the steel plate on it. The model can be easily removed by bending the plate when the bed temp cools down, without the need for additional adhesives, tapes, or slurry. It is possible to add inductive Z probes and add ABL printers for certain objects that need to be upgraded.
- To clean, Just wipe down with isopropyl alcohol between prints for best results. If you ever need to restore adhesion, use very fine sandpaper 600 or higher and pass lightly, then clean with alcohol.
Creality Ender 3 Glass Bed Upgraded 3D Printer Platform Tempered Glass Plate Build Surface, 235x235x4mm, for Ender 3 Pro/V2/S1/S1 Pro/Ender 5 Pro,CR 20/pro Heated Bed GlassENOMAKER
136 ratingsMore info 4
- Creality upgraded Ender 3 glass bed carborundum tempered glass plate.
- Excellent adhesion: Ultrabase covered by microporous coating, shows strong adhesion in printing. Easy to take off models by hand or with a little help from the scrapper for very large models.
- Super flatness, fast and uniform heating.
- DURABLE: The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400℃.
- Compatibility: perfectly suitable for the Ender 3/pro/V2/S1/S1 Pro, ender 5/pro,CR 20/pro, CP-01,compatible with all the Cartesian style 3D printer with a MK3 heated bed of 235×235mm.
Official Creality Ender 3 V2 Upgraded 3D Printer with Silent Motherboard Meanwell Power Supply Carborundum Glass Platform Resume Printing Function, DIY FDM 3D Printers Build Size 8.66x8.66x9.84 inchCreality 3D
5758 ratingsMore info 5
- Self-developed Silent Motherboard: The Ender-3 V2 built-in self-developed silent motherboard, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
- UL Certified MeanWell Power Supply: Equipped with MeanWell power supply, produced by the listed company with mature technology, meeting all the needs of fast heating and long-time printing. Moreover, the power supply is concealed in the machine, making it much safer.
- Effortless Filament Feed-in: Ender-3 V2 adds a rotary knob on the extruder, making loading and feeding filament process much easier; Brand new operation UI system and 4.3" smart color screen greatly improve user experience.
- Resume Printing Function: Can resume printing from the last recorded extruder position after suffering unexpected power outages, saving your time and reducing waste.
- Carborundum Glass Platform: Enable the hotbed heat up quicker and prints adhere better without the warping. Ultra smoothness even on the first layer.
New Upgrade Creality CR-10/CR 10S Tempered Glass Bed 3D Printer Platform, 310 x 310MM Tempered Glass Plate Build Surface for CR-10/CR 10SCreality 3D
261 ratingsMore info 6
- [Experience Pro-hesion] our state of the art carbon and silicone build surface provides the best adhesion in the market. Once the hotbed cools back to room temperature, the carbon-silicone base will release the model which can be easily removed by hand.
- [Easy Remove Prints] reduce adhesion after cooling. It is easy to separate the model and the platform and remove the model. The special coating is inorganic and has a hardness of 8 Mohs. Scratch proof and dust proof.
- [Easy Operation] this CR-10 bed plate can be placed on top of any existing hotbed surface and be held in place with simple clips. Tempered Glass provides ultra flat and smooth surface for a flawless printing.
- [Suit For] creality original upgraded glass bed for CR-10 and CR-10S 100%.Not suit to CR-10SPro/10spro V2
- [Use Attention] do not rub with organic solvents when cleaning, such as alcohol, acetone, etc., wipe with water; do not scratch or scratch the surface with sharp objects or sandpaper, they will destroy the surface coating. You can take it off slowly with a spatula. This is the official Creality 3D store. All products have been tested extensively with all Creality brand products to insure increases in quality and no sacrifice in safety or performance.
3D Printer Textured PEI Spring Steel Sheet with Flexible Magnetic Sticker 235x235mm Surface for Aquila Ender 3, Pro, V2, S1, Ender 5, KP5Mk1
144 ratingsMore info 7
- Size: Magnetic plate 235mmx235mm/9.2x9.2 inch for Ender 3, Ender 3 Pro, Ender 3 v2, Ender 3 S1, Longer LK4, LK4 Pro, and most other 235mm 3D printers.Note: it is single side, one side is textured.
- High quality build plate: The custom-designed textured PEI material let’s your prints easily adhere to the flexible print bed.
- Easy to install: PEI spring steel sheet made of high quality stainless steel and strong magnetic base, stick the magnetic base to your build plate by peeling off the backing paper and sticking it to your bed, then place the steel plate onto the magnetic sheet. Keep the side with PEI facing up to print on. Please peel off the protective film on the surface before printing.
- When printing is complete, let the PEI Sheet cool down enough (to around 40C), then easily remove the prints. If the print is still stuck, just gently bend the steel plate and pop it off! After many times printings, lightly scour the surface of the PEI with some mild steel wool with 400 grit will have great adhesion or use alcohol to clear it and let it dry.
- We have applied PEI sheet on the build plate by machine, so you don't need to worry about the performance. If you receive the package but find the air bubbles or scratches, they are only on the surface and won’t effect printing performance. The PEI is textured, so scratches over time from printing will not show up in your print. The textured surface leaves an eye catching, professional finish to your print.
FLASHFORGE 3D Printer Finder 3 with Dual Platforms, Larger Print Size 190x195x200mm for Education and Family Use, Direct Drive Extruder Works with ABS/Hips/PETG/TPU/PLA PRO FilamentsZhejiang Flashforge 3D Technology Co., Ltd.
11 ratingsMore info 8
- 【Continuation of the Classic】Finder 3.0 retains the classic red and black color scheme of Finder 2.0 and features an integrated structure design. With no assembly required, it's easy to use in a second after being unpacked; smaller equipment size and large volume for higher volume utilization.
- 【Dual Platform Options for Individual Needs】Glass platform provides a strong adhesion, so the printing model will not easily become warped. PEI magnetic steel plate platform, gold PEI plate, anti-warping edge, magnetic sticker owns a strong magnetic force to make sure it is durable. Both plate can be easily removed and replaced to meet diversified printing needs.
- 【Intelligent Sensor Technology】Newly added functions of power loss recovery and filament run-out detection: In the event of an unexpected power failure, it can save the printing status and continue printing after the power is restored. When the filament is used up or accidentally broken, it will alarm and pause printing, and then continue printing after the filament is replenished or replaced.
- 【Compatible with Multi-types Filaments】Its direct drive extruder design and the heating temperature up to 260℃ achieve smoother filament feeding. Finder 3.0 not only supports printing ABS/HIPS/PETG/PETG PRO filaments but also meets the printing requirements of TPU 95A flexible filament and third-party filaments. It offers stronger compatibility and a wider application range.
- 【What You Get】Flashforge 3d printer Finder 3.0,12 months warranty, lifetime technical assistance and 24 hours professional customer service.
Flashforge 3D Printer Finder 3 Glass Heating Bed with Removable PEI Surface and Magnetic Platform, Fully Assembled, Large FDM 3D Printers with 7.5" x 7.7" x 7.9" Printing SizeZhejiang Flashforge 3D Technology Co., Ltd.
1050 ratingsMore info 9
- ✅ 【Large Size & Direct Drive Extruder】Compared with Finder 2, the build volume of Finder 3 is increased by 270%. It increases the success rate of a perfect first layer and offers stronger compatibility and wider application range.
- ✅ 【260℃ High Temperature Nozzle & Support Various Filament】High filament compatibility. More printing possibilities. Finder 3 3d printer shows great performance on 3d printing PLA/ABS/HIPS/PETG/PETG PRO/TPU 95A and etc.
- ✅ 【Glass Platform & PEI Magnetic Build Plate】Good adhesion to the printed model and enables fast heating up of the heat bed. The build plates is not only durable but also flexible. Once the printing completes, users can remove the printed model effortlessly.
- ✅ 【Resume Printing & Filament Sensor】Finder 3 features the function of detecting whether a strand of filament is inserted into the extruder. It can fully recover from the loss of power and continue printing exactly where it left off.
- ✅ 【Efficient After-sales Support】All of our 3d printers provide one month free return and exchange. Lifetime technical support, a one-year warranty and reliable 12-hour response service. At Flashforge, zero risk purchase is for every customer's smiles.
ANYCUBIC Vyper, Upgrade Intelligent Auto Leveling 3D Printer with TMC2209 32-bit Silent Mainboard, Removable Magnetic Platform, Large 3D Printers with 9.6" x 9.6" x 10.2" Printing SizeANYCUBIC
912 ratingsMore info 10
- Upgrade Auto Leveling: ANYCUBIC Vyper is one of the very few 3D printers that has auto leveling feature, the intelligent leveling system equipped with 16-point precise pressure strain gauge, which can adjust the uneven hotbed automatically, greatly simplifies your print preparation and improves your print success rate.
- Large Printing Size: ANYCUBIC Vyper 3D Printer comes with a large build volume of 9.6"(L) x 9.6"(W) x 10.2"(H) / 24.5 x 24.5 x 26cm, which leaves enough space and freedom to fully realize your fantastic creativity.
- Fast and Stable Printing: Compared with ordinary 3D printers, Vyper's max printing speed can reach 7.1 in/s / 18 cm/s, which save more time on waiting. High-precision double screw design makes printers run more stable operation and the patented Z-axis can avoid print layer marks, greatly improving the printing details and precision.
- Durable and Removable Magnetic Platform: ANYCUBIC Vyper's platform adopts a special coating combined with spring steel, you can remove the models easily with your bare hands simply by taking off the entire platform and then bend it. it can remain flat for decades, beside it's rust-proof and completely maintenance-free.Widely compatible with PLA/ABS/PETG/TPU filaments.
- Intelligent Resume Printing Function: Vyper 3D Printer supports automatically resume printing when Power off or the filament is insufficient or breakage, the sensor will pause printing to save time and avoiding material waste. More functions like double fan two-way heat dissipation, 4.3" LCD screen, Fast assemble, which greatly improved printing experience.