Noctua NF-P12 redux-1700 PWM, High Performance Cooling Fan, 4-Pin, 1700 RPM (120mm, Grey)
NOCTUA
14111 ratings
More info
1
Product Features
- High performance cooling fan, 120x120x25 mm, 12V, 4-pin PWM, max. 1700 RPM, max. 25.1 dB(A), >150,000 h MTTF
- Renowned NF-P12 high-end 120x25mm 12V fan, more than 100 awards and recommendations from international computer hardware websites and magazines, hundreds of thousands of satisfied users
- Pressure-optimised blade design with outstanding quietness of operation: high static pressure and strong CFM for air-based CPU coolers, water cooling radiators or low-noise chassis ventilation
- 1700rpm 4-pin PWM version with excellent balance of performance and quietness, supports automatic motherboard speed control (powerful airflow when required, virtually silent at idle)
- Streamlined redux edition: proven Noctua quality at an attractive price point, wide range of optional accessories (anti-vibration mounts, S-ATA adaptors, y-splitters, extension cables, etc.)
ARCTIC P12 PWM PST - 120 mm Case Fan with PWM Sharing Technology (PST), Pressure-optimised, Quiet Motor, Computer, Fan Speed: 200-1800 RPM - Black
ARCTIC
6262 ratings
More info
2
Product Features
- OPTIMISED FOR STATIC PRESSURE: During the development of the new P12 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure
- 200 TO 1800 RPM REGULATED VIA PWM PST: Thanks to 4-pin connector, the RPM can be regulated in a broad spectrum via PWM, noise is kept at minimum while maximum cooling performance is given when needed
- EFFICIENT TECHNOLOGY: The motor is powered by a latest generation PWM IC, achieving higher efficiency and saving energy without compromising performance
- EXTENDED LIFE SPAN: A 10 °C lower motor temperature roughly doubles the life span of a fan, the new ARCTIC motor has a four times longer service life through its low coil temperature
- TECHNICAL DATA: Fan speed: 200–1800 RPM, Airflow: 56.3 CFM/95.65 m³/h (@ 1800 RPM), Noise Level: 0.3 Sone (@ 1800 RPM), Pin: 4-pin
ARCTIC P14 (5 Pack) - 140 mm Case Fan, Value Pack, Pressure-optimised, Very quiet motor, Computer, Fan Speed: 1700 RPM - Black
ARCTIC
4078 ratings
More info
3
Product Features
- OPTIMISED FOR STATIC PRESSURE: The fan guarantees extremely efficient cooling, even with increased air resistance, therefore, the P14 is particularly suitable for use on heatsinks and radiators
- HIGH QUALITY BEARING: Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved
- INNOVATIVE DESIGN: The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation, the impeller was designed with a focus on minimzing the noise level
- LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life
- TECHNICAL DATA: Fan speed: 1700 RPM, Airflow: 72.8 CFM/123.76 m³/h (@ 1700 RPM), Noise Level: 0.3 Sone (@ 1700 RPM), Pin: 3-pin
ElecGear Replacement Internal Cooling Fan for PS4 Pro CUH-7xxx – CPU Heatsink Cooler, Playstation Thermal Compound Paste, TR8 Torx Security, PH0 Screwdriver Repair Teardown Tool Kit for PS4 Pro
ElecGear
1134 ratings
More info
4
Product Features
- PS4 Pro Replacement internal CPU cooling fan – Nidec G95C12MS1CJ for PlayStation 4 Pro console. This model is the latest and upgraded edition. Interchangeable with previous model G95C12MS1AJ-56J14 (that is AJ) and Delta KSB1012H. Compatible with PS4 Pro edition with model number ✅CUH-70xx, ✅CUH-71xx and ✅CUH-72xx
- Brand-new, Sony PlayStation 4 authentic and 100% tested in perfect working condition; 3Pin DC12V PWM power plug; Well wrapped in industrial EPE protective bag and box. Repair tutorial is offered on ElecGear web site
- Top quality thermal compound paste is included to totally solve the heat problem of PlayStation 4. This is the ideal CPU heatsink grease, tested and selected with high thermal conductivity, low thermal resistance, metal-free, non-bleeding and 8 year durability
- TR8 Torx Security (T8 tamper proof screwdriver) and Phillips #0 cross screwdriver repair tool kit are included for console teardown and assembly operation. Also included is the disposable pre-moistened wipes which make quick and easy to safely remove the old thermal paste
- Packaging: 1*Nidec G95C12MS1CJ; 1*CPU Thermal Paste; 1*TR8 Torx Security screwdriver; 1*PH0 screwdriver; 1*Spudger; 1*Wipes. (Be noticed: This model is NOT compatible with first generation of ❌PS4 CUH-1xxx or ❌PS4 SLIM CUH-2xxx. Please check our shop for other two models.)
Noctua NF-R8 redux-1200, Ultra Quiet Silent Fan, 3-Pin, 1200 RPM (80mm, Grey)
Noctua
969 ratings
More info
5
Product Features
- Ultra low noise fan, 80x80x25 mm, 12V, 3-pin Molex, 1200 RPM, 9.1 dB(A), >150,000 h MTTF
- Renowned NF-R8 high-end 80x25mm 12V fan, more than 100 awards and recommendations from international computer hardware websites and magazines, hundreds of thousands of satisfied users
- Highly optimised low-noise design with outstanding quietness of operation, static pressure and airflow (CFM), ideal for chassis ventilation, cooling fan replacement for NAS and other devices, etc.
- 1200rpm 3-pin version with excellent balance of performance and quietness, speed can be controlled with optional NA-SRC10 Low-Noise Adaptors or by reducing voltage
- Streamlined redux edition: proven Noctua quality at an attractive price point, wide range of optional accessories (anti-vibration mounts, S-ATA adaptors, y-splitters, extension cables, etc.)
ARCTIC F8 PWM PST CO - 80 mm Case Fan with PWM Sharing Technology (PST), Dual Ball Bearing for Continuous Operation, Computer, Fan Speed: 300-2000 RPM - Black
ARCTIC
18 ratings
More info
6
Product Features
- INNOVATIVE DESIGN: Design of fan blades improves airflow and facilitates efficient ventilation, impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure
- PERFECT CASE FAN REGULATION WITH PWM: The PWM function allows the motherboard to run the fan precisely at its necessary speed, this guarantees the required cooling and minimizes the noise level
- PWM SHARING TECHNOLOGY (PST): PST assures that all of your fans listen to one control signal, e.g. you share the CPU Cooler's PWM signal and assure that your case fans stand down at low load and spin up whenever necessary
- JAPANESE DUAL BALL BEARING: The premium quality Japanese dual ball bearing allows continuous operation 24/7 without the slightest compromise in performance
- TECHNICAL DATA: Fan speed: 300–2000 RPM, Airflow: 31 CFM/52.7 m³/h (@ 2000 RPM), Noise Level: 0.3 Sone (@ 2000 RPM), Pin: 4-pin
ARCTIC F8 TC - 80 mm Case Fan, Case Fan with Temperature Control, Very Quiet Motor, Computer, Fan Speed: 350-2000 RPM - Black/White
ARCTIC Inc
2153 ratings
More info
7
Product Features
- INNOVATIVE DESIGN: Design of fan blades improves airflow and facilitates efficient ventilation, impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure
- TEMPERATURE CONTROL: Temperature sensor is on a 40 cm cable and can be placed in the warm areas of your computer, this assures temperatures no higher than 38 °C
- TWO WAY INSTALLATION: Blow warm air out of the case, draw cool air into your case
- LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life
- TECHNICAL DATA: Fan speed: 350–2000 RPM, Airflow: 31 CFM/52.7 m³/h (@ 2000 RPM), Noise Level: 0.3 Sone (@ 2000 RPM), Pin: 3-pin
ARCTIC P8 - 80 mm Case Fan, Pressure-Optimised, Very quite motor, Computer, Fan Speed: 3000 RPM - Black
ARCTIC
1121 ratings
More info
8
Product Features
- OPTIMISED FOR STATIC PRESSURE: The fan guarantees extremely efficient cooling, even with increased air resistance, therefore, the P8 is particularly suitable for use on heatsinks and radiators
- HIGH QUALITY BEARING: Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved
- LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life
- REDESIGNED FAN BLADES: The P8 fan features completely redesigned fan blades and is optimised for high static pressure
- TECHNICAL DATA: Fan speed: 3000 RPM, Airflow: 23.4 CFM/39.76 m³/h (@ 3000 RPM), Noise Level: 0.3 Sone (@ 3000 RPM), Pin: 3-pin
ARCTIC P12 PWM PST RGB 0dB - 120 mm PWM case fan optimized for static pressure, case fan, semi-passive: 0-2000 RPM, 12V 4 pin RGB LED, single fan - Black
ARCTIC
186 ratings
More info
9
Product Features
- ANALOG RGB ILLUMINATION: The 12 RGB LEDs placed along the fan hubr and the transparent rotor with its closed design provide a uniform and rich illumination
- EASY TO COMBINE: Both the fan and RGB cables have an integrated Y-splitter, making it even easier to retrofit and control additional fans
- OPTIMIZED FOR STATIC PRESSURE: Thanks to the high static pressure, the fan guarantees efficient cooling even with increased air resistance. Suitable for use on heat sinks & radiators
- 0-2000 RPM: The speed of the fan can be throttled down to standstill via PWM. This allows for silent operation in IDLE while guaranteeing the highest performance when needed
- SPECIFICATIONS: Fan speed: 0-2000 RPM; Airflow: 48.8 CFM/82.91 m³/h; Static pressure: 1.85 mmH2O; Noise level: 0.3 Sone; Fan connector: 4-pin; LED connector: 4-pin
ARCTIC P12 PWM PST RGB (3 Pack) - 120 mm PWM case Fan Optimized for Static Pressure, case Fan, semi-Passive: 0-2000 RPM, 12V 4 pin RGB LED - Black
ARCTIC
133 ratings
More info
10
Product Features
- ILLUMINAZIONE ANALOGICA RGB: I 12 LED RGB disposti lungo della ventola e il rotore trasparente con il suo design chiuso, forniscono un'illuminazione uniforme e completa
- FACILE DA COMBINARE: Sia il cavo della ventola che il cavo RGB hanno uno Y- splitter integrato, rendendo ancora più facile la possibilità di aggiungere altre ventole.
- OTTIMIZZATO PER LA PRESSIONE STATICA: Grazie all'alta pressione statica, il ventilatore garantisce un raffreddamento efficiente anche in caso di alta resistenza dell'aria. Adatto per l'uso su dissipatori e radiatori
- 0-2000 RPM: la velocità della ventola può essere regolata fino al minimo tramite PWM. Questo permette un funzionamento silenzioso in IDLE e allo stesso tempo garantisce le massime prestazioni quando è necessario.
- SPECIFICHE: Pacco da 3, Velocità della ventola: 0-2000 rpm, Flusso d'aria: 48.8 CFM/82.91 m³/h, Pressione statica: 1.85 mmH2O, Livello di rumore: 0.3 Sone, Connettore ventola: 4-pin, Connettore LED: 4-pin