Product Features
- RMS @ 4 Ohm (<1% DISTORTION): 2 x 215W
- RMS @ 2 Ohm (<1% DISTORTION): 2 x 420W
- RMS @ 1 Ohm (<1% DISTORTION): 2 x 625W
- Maximum Power Output: 1 x 1200W
- Minimum Load: 1 Ohm
Product Features
- Mono channel operation
- Variable low-pass filter
- Subsonic filter
- Double side FR-4 PCB high quality SMD components
- Overload, short circuit, thermal and low voltageSpecifications
Audiopipe APMI-4095 Class AB 1300 Watt Compact Mini MOSFET 4 Channel Amplifier for Car Stereo Sound System with Bass Knob and Bridged Operation
AudioPipe
164 ratings
More info
3
Product Features
- HIGH-PERFORMANCE AMP: Upgrade your audio system to this high-performance class AB mini 4-channel amplifier boasting 1,300 watts of power for bumping bass and full sound
- PERFORMANCE FEATURES: Bridged operation for customizable use; RMS performance includes 100 watts x 4 at 4-ohm, 130 watts x 4 at 2-ohm, and 250 watts x 2 bridged at 4-ohm
- SAFETY FEATURE: Designed with soft start turn-on as an added safety power-up measure
- INCLUDES: Remote gain control and wired remote bass level control
- SPECIFICATIONS: Dimensions (L x W x H): 9.5 x 6.5 x 2.2 inches; Frequency response: 50 to 1.2 KHz; Input sensitivity: 0.2 to 6-volt; Signal to noise: Greater than 80 dB
Audiopipe APMCRO-1800 Micro Monoblock Class D Amplifier 800W Max
AUDIOPIPEMAP
11 ratings
More info
4
Product Features
- Micro Class D Amplifier
- Overload protect systemIncludes:
- Bass RemoteSpecifications
- Maximum Power Output: 800W
- RMS @ 4 Ohm: 289W
Product Features
- 1500 WATTS
- 4 CHANNEL CLASS AB
- 4 CH -75W x 4@4Ω
- 4 CH -125W x 4@2Ω
- 2 CH - 225W x 2@4Ω
Audiopipe APMN-2000 RMS Class D Monoblock Subwoofer Amplifier, 2000W Mono Sub Amp
Audiopipe
311 ratings
More info
7
Product Features
- PLEASE NOTE: Its Recommended Grounding To The Frame of The Vehicle.
- RMS Power Rating (4 ohms): 770 watts x 1 channel. - RMS Power Rating (2 ohms): 1300 watts x 1 channel.
- RMS Power Rating (1 ohm): 1944 watts x 1 channel.
- Frequency Response: 30-180Hz. LPF: 40-180Hz Subsonic Filter: 5-50Hz
- Fuses: 1 X 150A AFC fuse and fuse holder (included) Remote bass knob, 1 Ohm Stable.
Audiopipe Multi-Audio Amplifier 3 RCA outputs w/bulit in 10V line driver
Audiopipe
202 ratings
More info
8
Product Features
- This unit accepts 3 RCA inputs from a head unit: Front, Rear, and Subwoofer
- Provides 3 amplified outputs for each input: 3 front outputs, 3 rear outputs, and 3 subwoofer outputs
- 10V Line Driver; Harmonics Distortion: 0.009% Frequency Response: 20-2000Hz Output Gain: 12 dB
- Output Level (10KHz): > 1V(1KHz Output Impedance: 1 KOhms Channel Resolution: > 60dB
- Input Impedance: 47 KOhoms Input Sensitivity: 260mV S/N Ratio: > 95dB
AudioPipe APMN-4200D 4 Channel 3000 Watt Max Power MOSFET Class D Car Audio Stereo Amplifier with Inline Fuse and Bass Knob, Black
AudioPipe
66 ratings
More info
9
Product Features
- CAR AUDIO AMPLIFIER: Class D car audio amplifier featuring 3000 watts of maximum power
- RMS POWER: RMS Power: 4 x 182 watts at 4 ohms, 4 x 242 watts at 2 ohms
- POWERFUL AUDIO: Built on mini chassis for powerful audio in tight spaces
- INTERNAL COMPONENTS: Features a double side printed circuit board
- AMPLIFIER SPECIFICATIONS: Maximum power output: 2 x 420 watts; Frequency response: 50 to 1.2kHz; Signal to noise ratio: >80dB; Input sensitivity: 0.2 to 6 volts; Current draw: 80 amps; Bass boost level: 0 to approximately 15dB
Audiopipe 4 Channel Amplifier – Class A/B Multichannel Amplifier 2200 watt, Car Electronics Car Audio Subwoofer 2 Ohm Stable Bass Boost Crossover Amplifier for Car Speakers Sub Amp
Audiopipe
27 ratings
More info
10
Product Features
- Features – The 4 channel bass boost amplifier has features like - Frequency Response: 40HZ-5000HZ, Distortion < 0.5%, Bass Boost, SNR: 95DB, Remote Bass Knob, 2-way protection, RCA Inputs & Outputs
- Quality - This Class A/B 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others.
- Power – This Class A/B 2200 watt Amplifier has a power rating distribution as followed 4 X 133 WATTS RMS @ 2 OHMS, 4 X 100 WATTS RMS @ 4 OHMS, 2 X 256 WATTS BRIDGED @ 4 OHMS. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design.
- Low/High Level Inputs – The multichannel amplifier for car speakers come with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
- Class A/B – This multichannel subwoofer amplifier exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class b amplifier has no current flowing.
