Product Features
- 8-ohm Bass Speaker Cabinet with 1 x 12" Neodymium Speaker - Black
- 400-watt
Product Features
- 10" Bass Guitar Speaker
- 8 Ohm
- Kevlar loaded cone
- Tight, punchy low end
Seismic Audio Speakers 15” Bass Guitar Speaker Cabinet, 300 Watts RMS Speakers, 1 x 15
Seismic Audio Speakers, Inc.
55 ratings
More info
3
Product Features
- Guitar Speakers: The quality of sound is only as good as your equipment & this bass guitar cabinet should not be overlooked. Each cabinet has one 15" woofer with a 50 oz magnet & 2.5" Kapton voice coil with crystal clear sound & rejecting extraneous noise.
- Cabinet Speakers: Each bass guitar cab is made with 5/8" plywood. The front panel is outfitted with black carpet with black metal corners.
- Bass Guitar Speaker Cab: At 300 Watts RMS, it makes for a great smaller rig or pairs up with a 2x10 or 4x10 cab for a powerful full range set up.
- Bass Guitar Cabinet: These features along with the recessed handles & full metal grill make this cabinet fit right in with your other professional equipment on stage.
- Seismic Audio Speakers: The dual-ported cabinet provides great low-end reinforcement along with great articulation in the mid range.
Product Features
- 400 watts program power handling
- 800 watts peak
- Two custom-designed 10 ceramic magnet woofers
- 8 ohms impedance
- 18mm MDF cabinet with internal bracing and steel corners
Product Features
- Angled baffle
- One 10" 8-Ohm high efficiency neodymium full-range driver
- 300W (rms) power handling
- Dual paralleled Speakon/phono combo input jacks
- Built-in cradle for ELF bass amp
Eminence Legend CA154 15" Bass Guitar Speaker, 300 Watts at 4 Ohms
DJ Tech Pro USA, LLC
104 ratings
More info
6
Product Features
- Pro sound 15" woofer for use in bass guitar cabinets or in a PA cabinet
- A 4 ohm driver with high SPL
- Easily handles 600W and frequencies from a low 45 Hz to 3 kHz
Seismic Audio - Empty 212 Guitar Speaker Cabinet - 2x12 PA/DJ PRO Audio - Loaded with Everything but Speakers. Includes Grill, Wire, Jack Plates, Handles, etc.
Seismic Audio
56 ratings
More info
7
Product Features
- Model # - SA-212Empty
- Does not include speakers/woofers
- Can be loaded with your own speakers.
- 5/8 plywood front panel. Black carpet with black metal corners. Recessed Metal handles
- Full Metal Grill. Terminal cup with two 1/4". 15” tall – 29” wide – 14” deep
SONICAKE IR Pedal Speaker Cabinet Simulator Impulse Response Loader Guitar Bass Effects Pedal
SONICAKE
1510 ratings
More info
8
Product Features
- IR Pedal Simple & Efficient Impulse Response Loading tool for simulating all kinds of Speaker Cabinets
- 11 on-board Classic Guitar/Bass Cabinet Simulations with Volume Control
- Super easy way (Drag and Drop operation) for Managing IR Files (recognized as a USB Disk)
- XLR Balanced Output for plugging into Mixer or Audio Interface or PA System
- Working with 9V Center Negative Regular Pedal Power Supply(not included)
Seismic Audio - 210 Bass Guitar Speaker Cabinet PA DJ 400 Watts 2x10 PRO AUDIO
Seismic Audio Speakers, Inc.
92 ratings
More info
9
Product Features
- Can be daisy chained; Dual ports (both in the middle); 19" tall -26" wide -15" deep
- Woofer -two 10" each has a 50 Ouncemagnet with a 2" kapton voice coil; 200 watts rms -400 watts peak
- Wired at 8 ohms. 40hz –5khz sensitivity: 97 db. 5/8 plywood front panel. Full metal grill
- Black carpet with black metal corners. Recessed handles. Metal jack plate with two 1/4" jack inputs
Seismic Audio - SA-Rift_46G - 4x6 Bass / Guitar Speaker Cabinet
Seismic Audio Speakers, Inc.
40 ratings
More info
10
Product Features
- Model #: SA-Rift_46G
- Woofer: Four 6" - each has a 30 oz. magnet with a 1.5" Kapton voice coil
- Frequency response: 20Hz - 10kHz
- 250 Watts RMS, 500 Watts Peak
- Impedance: 8 Ohms
