DS18 ZR1000.1D Car Amplifier 1-Channel Class D Monoblock Amp 1000 Watts RMS - Remote BASS Knob IncludedDS18
2 ratingsMore info 1
- The ZR Series amps are sure to power all your subwoofers with great sound acuity and massive bass frequency responses.
- They have been designed to efficiently pump out hard hitting bass and put your subwoofers at their maximum potential.
- Easily tuned, The ZR1000.1D comes with Lowpass and Subsonic filters to help you set to the perfect frequency for your music preference.
- The included bass knob will help you attenuate your bass with a quick turn of the dial to tune in your bass volume with every song you play.
- The ZR1000.1D is made to deliver 1000 watts RMS @ 1-Ohm, 650 watts RMS @ 2-Ohms, and 380 watts RMS @ 4 ohms giving you the perfect power for your bass.
Alphasonik V3000.1D Venum Series 6000 Watts Max Monoblock Car Amp with Power Plant Chip 4-Way Protection Circuitry 1-Channel Subwoofer Class-D Amplifier with Remote Bass Boost Control Knob IncludedAlphasonik
11 ratingsMore info 2
- This listing contains: (1) V3000.1D 6000 Watt Mono-Block Class-D Amplifier (1) Remote Bass Knob with Connector cable
- 1 x 750W @ 4 Ohms 1 x 1500W @ 2 Ohms 1 x 3000W @ 1 Ohm
- Features: Nickel Plated Terminals Low Level Inputs Low Level Outputs Remote Bass Knob Included Mil Spec Double-Sided Glass Epoxy FR Circuit Board 4-Way Protection Circuitry: Thermal, Short Circuit, Overload and DC Offset Variable Low-Pass Crossover: 40Hz - 300Hz Variable Input Sensitivity: 200mV - 6V Variable Subsonic Filter: 10Hz - 300Hz 45Hz Bass Boost: 0 - 12dB S/N Ratio: > 90dB THD: 0.12%
- Product Dimensions: 9.2" x 2.3" x 18.3" (233 x 59 x 465mm)
476 ratingsMore info 3
- 4,000 watts x 1 channel max power output
- 2,800 watts RMS x 1 channel at 1 ohm
- 2,000 watts RMS x 1 channel at 2 ohms
- 1,000 watts RMS x 1 channel at 4 ohms
- Designed to power vehicle subwoofer
Audiopipe APCLE-18001D Class D 1800 Watt RMS Monoblock Amp Kit Car Audio Sound System Amplifier with Bass Knob and Overload Protection, Black (2 Pack)AudioPipe
13 ratingsMore info 4
- HIGH-PERFORMANCE AMP: Upgrade your audio system to this high-performance class D monoblock amplifier boasting 1,800 watts of RMS power and variable Ohm for bumping bass and full sound; 4 ohms: 750 watts RMS x 1, 2 ohms: 1,100 watts RMS x 1, 1 ohm: 1,800 watts RMS x 1
- CUSTOMIZED SOUND: Bass-boost frequency and level adjustable for customized bass, adjustable subsonic and low-pass filter for hitting all frequencies, 1-Ohm load stability, and phase adjustability; Bass boost: 0 12dB, Variable bass boost frequency: 30Hz 80Hz; Wired bass knob included; Frequency response: 8Hz 180Hz
- SAFETY FEATURES: MOSFET circuit design with overload, short-circuit, thermal, and low-voltage protection to keep your device safe and running smoothly
- BRIDGEABLE DESIGN: Easy bridging operation for versatile use
- INCLUDES: Package includes 1-channel power amp, bass knob, and mounting hardware; Dimensions (L x W x H): 17 x 7 x 2.2 inches; Manufacturer warranty: 1-year warranty; LED diagnostic lights; Signal to noise: >70dB; Quantity: 2
Planet Audio AC1500.1M Monoblock Car Amplifier - 1500 Watts Max Power, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Remote Subwoofer ControlPlanet Audio
2985 ratingsMore info 5
- power: max power output of 1500 watts at 2 ohms into one channel. maximum power output of 750 watts at 4 ohms into one channel. this amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
- high level inputs: speaker level inputs are commonly referred to as high-level inputs. this input will be used to connect the ac1500.1m to your factory radio or aftermarket radio that does not have low-level (rca) inputs
- low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac1500.1m with the source unit. most aftermarket radios have multiple pairs of rca outputs that can connect to multiple amplifiers
- low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. a low-pass filter will primarily keep high notes out of your subwoofer(s)
- variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it
Pioneer GM-D9701 2400W Max 1-Channel GM Digital Champion Series Class-D Monoblock Car Audio Stereo Amplifier w/Wired Bass Boost Remote and Free Alphasonik ErabudsPioneer
436 ratingsMore info 6
- RMS Power Rating: 4 ohms: 500 watts x 1 chan. / 2 ohms: 800 watts x 1 chan. / 1 ohm: 1200 watts x 1 chan.
- Pulse Width Modulated MOSFET power supply Wired remote bass level control included
- Preamp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection)
- Heavy duty aluminum alloy heat-sink for extreme heat dissipation Nickel-plated RCA level inputs Nickel-plated screw terminals
- Variable low-pass filter (40-240 Hz, 24 dB/octave) / Frequency response: 10-240 Hz / Dimensions: 12-3/8"W x 7-7/8"D x 2-3/8"H
DS18 GEN-X3000.1 Car Audio Amplifier 1-Channel Class D 3000 Watts Max Monoblock Amp - Bass Remote Knob Included - Lightweight Design - High Efficiency RateDS18Sound (Automotive Dummy vendor code for NIS)
9 ratingsMore info 7
- DS18 GEN-X3000.1D has the following RMS power: at 1 Ohm 1000 watts / at 2 Ohms 700 watts / at 4 Ohms 430 watts - THD Distortion 0.08%
- Designed, Engineered, Developed, and Quality Controlled in the USA - Minimum THD at Rated Power: 98dB. Under Voltage Protection at 10V. Over Voltage Protection at 15V. Bass Frequency Response: 30Hz - 80Hz. Fuse Rating 30A x 4
- High-Speed MOSFET Power Supply Optical Coupler Class "D" Technology. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 40Hz - 180Hz. Subsonic Filter: 17Hz - 50Hz. Phase Control Switch. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System.
- Molded power terminals have the highest current draw in the industry and they also look way nicer than other terminal styles. Power and Protection LED Indicator. LED Illuminated Logo. Dimensions: (L x W x H) 430 x 190 x 60 mm
- IN THE BOX - Amplifier, Bass Remote, Owner's Manual, & Mounting Screws.
BOSS Audio Systems MODEL R1600M Car Amplifier - Model 1600W High Output Amp, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Great Amp for SubwoofersBOSS AUDIO
2737 ratingsMore info 8
- POWER: 1600 Watts Max x 1 @2-Ohms, 800 Watts Max x 1 @4-Ohms
- CLASS A/B TOPOLOGY: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- MOSFET POWER SUPPLY: A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- VARIABLE LOW-PASS CROSSOVER: Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- VARIABLE BASS BOOST: Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
- VARIABLE GAIN CONTROL: The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- DIMENSIONS: The R1600M is 12.3 inches in Depth, 10.4 inches in Width and 2.25 inches in Height. It weighs 6.4 lbs.
- WARRANTY: BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com. We strongly encourage professional installation of this product to ensure proper and safe functionality
Lanzar B52 Car Audio, Amplifier Monoblock, 1 Channel, 2,000 Watt, 2 Ohm, RCA Input, Bass Boost, Mobile Audio, Amplifier for Car Speakers, Car Electronics, Crossover Network (HTG137) , BLACKSound Around
1183 ratingsMore info 9
- AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own.
- SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. RCA connectors ensure a secure connection between amplifier and speakers that allow distortion-free sound.
- INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design.
- RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
- GREAT DEAL: Often a monoblock amp comes with a high price tag. Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels. Please update the listing's title, description, & bullets.
211 ratingsMore info 10
- Blaupunkt 1500 Watt Monoblock Amplifier
- Max power output: 1500 watts / RMS Output Power Rating: 4 ohms: 120 watts x 1 channel / 2 ohms: 200 watts x 1 channel / Frequency Response: 10Hz - 30kHz
- Signal-To- Noise Ratio: >96 dB / Voltage Supply: 11 - 16V DC / Gain Adjust: 200mV-8V
- Total Harmonic Distortion: <0.05% / RCA Input: 2-channel / Fuse: 30A x 1
- Crossover Frequency: 40Hz - 250Hz / Crossover Slope (dB/oct): 12dB/oct