Product Features
- A genuine Rule product, don't settle for anything less
- Year after year, the Rule-A-Matic has been the switch of choice for boaters the world over
- Switch is removable from the base for easy cleaning
- Completely sealed metal capsules enhance flawless operation
- A mercury free snap switch tested to over one million cycles
- Marine grade "blocked" wire
Product Features
- A genuine Rule product, don't settle for anything less
- More pumping capacity and more exclusive design features than any comparable competitive pump at a lower cost
- 1-1/8 inch (28. 6 millimeter) hose barb discharge outlet
- Compact, efficient, long-life motors, able to run dry for short periods
- Silent and vibrationless operation, stainless steel shaft, completely submersible, rust and corrosion resistant
- 3 Year Warranty
Product Features
- Fit Type: Universal Fit
- Solvent Welded Construction
- Special Polyvinyl Grey Body And Shaft
- It Is Non-Sparkling
- Removable Foot Valve - Easy Clean
- Special Polyvinyl Grey Body And Shaft
Submersible Boat Bilge Water Pump 12v 1100gph Non-Automatic Marine Electric Bilge Pump for Ponds, Pools, Spas Silent, Boat Caravan RV Submersible
MAXZONE
2718 ratings
More info
4
Product Features
- Flow Rate: 1100 GPH; Voltage: 12 VDC
- Flow: 1100 gallons per hour or 5000 L / hour, Head: 13 Ft (4mts), Outlet Dia. 1-1/8" (29mm)
- Typical Uses: Suitable for hydraulic systems fed with cold water—used in line to be fed by gravity or pressure
- Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, Etc
- Built for the harsh marine environment, are suitable to withstand the most adverse condition. The water-cooled engine ensures a long service life
attwood 4505-7 Sahara S500 Automatic Bilge Pump, 12-Volt, 1.5-Amp Draw, ¾-Inch Interior Diameter Hose, 29-Inch 16-Gauge Wire
Attwood
1137 ratings
More info
5
Product Features
- Reliably provides bilge water pumping for boats of any size
- Meets automatic switch pump requirements for any vessels 20 feet and over with sleeping accommodations
- Also convenient and useful for boats of any size
- Compact and durable package includes pump, wire seals, strainer, and mercury-free switch in one unit
- Installs quickly and easily in tight spaces, mounts horizontally only
- 12-volt, 1.5-amp draw pump is rated for 500 GPH performance at open flow (at voltage of 13.6 volts DC)
- Comes with a 29-inch length of 16-gauge caulked and tinned copper wire, and uses a ¾-inch interior diameter hose
AIRTAK Bilge Pump for Boat DC12V 1500GPH Small Bilge Pump 12 Volt Electric Water Pump Low Noise with The Switch
AIRTAK
693 ratings
More info
6
Product Features
- Compact efficient long life motors: Small volumn and portable bilge pump is made of long life motors .It can Improve work efficiency
- Exclusive Moisture Ting Seals: Bilge pump is made from heavy duty marine sealant and corrosion material Protection
- Cleanable Strainer: The pump base is used by high qulity easy clean snap lock strainers. the life-span of the bilge pump could be prolonged.
- Easy to Install: Design common installation location and it can use with the bilge switch
- Wide Application : Bilge pump can be used in aquarium,fishing boats,fountain and other places to easily drain the water
Maxzone Bilge Pump Installation Kit Bilge Pump Hose 1-1/8-Inch Dia Plumbing Kit | 6 FT Premium Quality Kink-free Flexible PVC Hose | Includes 2 Hose Clamps and Thru-Hull Fitting
Sailflo MAXZONE
372 ratings
More info
7
Product Features
- Complete installation kit for bilge pumps with 1-1/8 inch outlet.
- Kit includes 6 FT of 1.125" ID (Inner Diameter) hose, 2 stainless steel worm gear hose clamps, and 1 thru hull connector.
- Cuff-less design with smooth inner bore prevents leaks at connection ends. Easy to cut to any desired length. Ideal for marine or freshwater boating
- Corrugated helix, kink-proof construction with an excellently tight bend radius ensures maximum durability and maintains a steady flow.
- Please verify your bilge pump outlet size before purchase. Not for use with below waterline thru-hull connections.
MAXZONE Automatic Submersible Boat Bilge Water Pump 12v 1100gph Auto with Float Switch (Blue - Automatic)
Sailflo
2951 ratings
More info
8
Product Features
- Flow Rate (GPH): 1100GPH; Volt: 12V; Current(A): 3.8A; Head(M): 3.0M
- Wire Lead(M): 1m; Outlet Diameter: 29mm/ 1.14 Inch (1-1/8"); Width: Approx. 81mm
- Built-in float switch! (No separate float switch is needed)
- No power use until pump is activated by internal float switch (when water level rises)
- Equipped with built in electronic controlled reed sensor system for easy fully automatic operation
Shoreline Marine Fully Submersible Bilge Pump, 600GPH with ¾’ Outlet Hose Barb
Shoreline Marine
2196 ratings
More info
9
Product Features
- Fully submersible 600 Gallons per hour bilge pump with a self-contained automatic switch to maintain a safe water level
- Features a durable plastic housing that can withstand the harshest marine environment
- Comes with a universal mounting base for effortless installation and cleaning
- With a tough stainless-steel impeller shaft and tinned marine grade wiring for a steady and reliable performance
- The outlet hose barb measures ¾’ that can fit a common ¾ bilge hose and thru-hull fittings
- 600 GPH Output
- Includes Mounting Bracket And Stainless Steel Hardware
- Marine Grade Wiring
ECO-WORTHY 1100GPH 12V Marine Electric Bilge Pump for Boat Caravan RV Submersible Non-Automatic
ECO-WORTHY
1606 ratings
More info
10
Product Features
- Flow Rate: 1100 GPH; Voltage: 12 VDC
- Flow: 1100 gallons per hour or 5000 L / hour, Head: 13 Ft (4mts), Outlet Dia. 1-1/8" (29mm)
- Typical Uses: Suitable for hydraulic systems fed with cold water—used in line to be fed by gravity or pressure
- Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, Etc
- Built for the harsh marine environment, are suitable to withstand the most adverse condition. The water-cooled engine ensures a long service life
