10 Best Camera Dollies

Product Features

• [Precise Scale] The camera dolly's board has precise scales on both ends, which can help you easily adjust the required angle so that the slider can move as needed and is easy to use.
• [Quiet] The wheels of this camera dolly are made of silicone, light and durable, very quiet, no noise at all, non-slip and will not cause any scratches on the desktop.
• [Portable] The camera dolly is portable and multifunctional, compatible with D-L-S-R cameras, sports cameras and mobile phones.
• [Usage Details] Use 1/4"" screws to fix on the board (suitable for various cameras and accessories)of camera dolly, you can install a ball head or phone clip on it to shoot with a sports camera or smartphone.
• [High-quality Material] The camera dolly is made of high-quality aluminum alloy, and the surface is precision processed and anodized. It is strong, light, durable, rust-proof, and its maximum load capacity can reach 10kg.

Product Features

Product Features

• 【Durable Large Wheels】The SmallRig professional tripod wheels 3986 is a camera dolly designed for mobile tripods and easy action photography. Equipped with a large and highly adaptive 3-inch rubber wheel, it can realize the stable movement of the tripod on a smooth ground and shoot a smooth tracking lens. wheel has an independent brake that stops the wheels from swiveling as well as turning, keeping the dolly stably locked in place.
• 【Fits Most Tripods】You can line up each tripod foot firstly, and then twist the thumb screws to tighten each clamp. Besides, the clamp can be adjustable. SmallRig 3986 clamp can extend to 54mm/2.12 ", suitable for tripod with leg diameter less than 54mm.Its max payload is 33 lbs (15 kg) for optimal performance.
• 【Simple Adjustable Legs】Its extendable legs, which extend from 298mm to 435mm (11.7" to 17.1"), make it compatible with different tripods in any opening and closing angles. The use of non slip flip lock not only ensures the security of the device, but also greatly increases the use experience.
• 【Easy-to-Store & Carry】Folding design. The tripod trolley is equipped with handles and carrying bag for easy transfer. Moreover, compared with most similar products, it has smaller folding space (16.9" x 5.9") and lighter weight (3.97 lbs/1.8kg), which increases great convenience.
• 【SmallRig Tripod Recommendations】The camera tripod dolly is compatible with SmallRig Heavy Duty Tripod 3751, SmallRig 72" Video Tripod 3760, SmallRig 68" Tripod 3983, SmallRig 71" Tripod 3935, SmallRig Selection Camera Tripod 3474 and other standard or professional tripods.

Product Features

• Quickly and easily transform your tripod to a easily moveable one,have sturdy and quiet shots while moving your tripod
• Extendable dolly leg from 274mm/10.8" to 400mm/15.7", just adjust and lock
• Tripod clamp knob fits most of tipod leg size
• You can tuck the leg and put it in the included carrying bag for better storage and portability
• Big handle for firm and confortable grip

Product Features

• Folding design, Easy to carry
• Easy to transform your tripod to a easily moveable one
• Versatile,tripod clamp knob can use for most of camera tipod leg size
• Extendable camera dolly leg from 290mm/11.4" to 425mm/16.7", just adjust and lock
• Big handle for firm and good Grip for you，and the tripod dolly with carrying bag
• Wheels Larger (3 inch) than Other Standard Size (2 inch), more Stable and Safety

Product Features

• PACKAGE CONTENTS: (1) x DSLR Camera Slider/Video Stabilizer Dolly Rail / (1) x Carry Bag
• DURABLE & SOLID MATERIAL: Made of carbon fiber and aircraft aluminum
• NOISELESS SLIDING MOVEMENT: Smooth sliding with six precision bearing rollers would help to create noiseless video and image
• VERSTILE CONTRUCTION: Multiple 1/4 inch and 3/8 in. screw holes for many mounting options, tripod or light stand
• GREAT MONTION CONTROL: Ideal for motion controlling of wide range of photo and video devices, such as cameras, camcorders, and DSLR.

Product Features

• <p>【Remote-Controlled Dolly】 Neewer Motorized Camera Dolly is a perfect tool for shooting time-lapse, low-angle, and panoramic videos. Use the wireless remote control to set speed levels (1.4cm/s, 2.4cm/s, 3cm/s), change directions, and start/pause the dolly up to 19.7’ (6m) away.Note: there will be noisy during the operation of motorized dolly car when you are recording audio.
• <p>【Angle Adjustable Wheels】 Two wheels with 90° angle adjustment enable the dolly to move in circular or linear paths. The 1/4” to 3/8” reversible screw is compatible with almost every video head, ball head, and phone holder. The dolly also works with camera sliders for achieving zoom effects
• <p>【Lightweight and Durable】 Made of high-quality aluminum alloy and ABS plastic, the dolly can support DSLR cameras, camcorders, and smartphones up to 6.6lb (3kg). Designed to fit in your palm, it is lightweight and conveniently portable for traveling filmmakers
• <p>【Built-In Rechargeable Battery】The built-in 1500mAh Li-ion battery can offer up to 6 hours of run time. A provided Micro USB cable helps recharge the battery to 100% in 3 hours
• <p>【4 LED Indicators】 4 LED indicators show charging status (charging: red, fully charged: green), battery status (low battery: 3 indicators flash at the same time), and speed levels

Product Features

• Dynamic Rolling Sliding Dolly Car: Helps you create more dynamic shots on flat surfaces like table, ground, etc; The precise scale on the disc helps you slide your camera in the right direction, with red lock screw
• Adjustable Aluminum Rods: Set them for a straight path, curves or complete circles. Balanced and tested to ensure a steady, safe ride for your camera equipment; Allows you to track in a straight line or track around an object
• 1/4-inch 3/8-inch Screw Threads and 4 1/4-inch Screw Holes: Fit for 1/4-inch and 3/8-inch tripod mounts; Allow you to mount your camera directly onto the dolly, or use an articulate arm or ball head for shooting at any angle you want
• Rotatable Rubber Wheels and Fluid Roller Bearings: Unique rotating movements enable you to shoot quietly and smoothly and adjust shooting directions
• Skate Design: Equipped with fluid roller bearings; Allows you to track the action, follow your subject, keep up with dynamic scenarios, while maintaining shots that are steady, smooth and dramatic

Product Features

• Universal for Tripods & Light Stands - The expandable dolly arms make compatibility a breeze for the varying triangular spreads of most tripod and light stands. Use the extending levers to adjust the length of each arm to fit the flex of your stand. Adjustable knobs make locking in your stand’s feet quick and easy for a sturdy hold without fear of tipping.
• Easy Movement - Enjoy silent motion and glide throughout your shoot with ease. The solid 2” rubber wheels make maneuvering the trolley quiet and effortless. Please Note: Not recommended for jitter-free video movement.
• Locking Wheels - Firmly plant your tripod/stand exactly where you need it with our individual locking wheels, letting you pause to get that perfect shot!
• Collapsible Storage - When you’re ready to store the trolley, simply pull the locking pin to collapse into an easy-to-stow size.
• We've Got You Covered - Sturdy, high-grade aluminum and steel design is backed with a 3 Year Manufacturer Warranty and friendly tech support to help with any questions or concerns.

Product Features

• 【Carbon Fiber Camera Slider】 Made of carbon fiber and aluminum alloy, this camera slider is solid and durable. Measuring only 16”/40cm in length and weighing 23.6oz/670g, you can take it anywhere you go with the carrying bag
• 【Smooth Movement】 The four precision bearings ensure a smooth sliding movement to create seamless video content. There is also an optional M6 threaded hole above each slider foot. Use these holes to install the feet and balance your camera’s center of gravity when the camera is mounted on the slider.
• 【Multiple Mounting Options】 Multiple 1/4” and 3/8” threaded holes at both ends and the bottom of the slider offer a wide range of mounting options. Use the slider on your tabletop, tripod or light stand. A 1/4” to 3/8” screw adapter is also included to mount most cameras and ball heads
• 【Adjustable Phone Holder】 The phone holder features an adjustable 5.7~8.6cm width and is compatible with most cell phones
• 【Easy to Use】 Easily angle the slider to take vertical or horizontal shots on a tripod and get premium shooting effects. The four rubber feet are removable and can be adjusted to shoot at a lower angle on most surfaces while ensuring stable shots