617 ratingsMore info 1
- SDR Series Single 10-Inch D2 ohm Loaded Subwoofer Enclosure
- Peak Power: 1,200 Watts | RMS Power: 600 Watts
- Pre-wired Internally for a 1 Ohm Final Impedance Load at the Terminals for an Easy Installation
- Premium Vented Enclosure Made of 5/8" MDF and Finished in Black Carpeting
- Double Front Baffle (1.25") with Countersunk Subwoofer Design for Flush and Attractive Appearance
39 ratingsMore info 2
- Rockville WHEEL OF BASS 8" 500w Slim Under-Seat or Trunk Mounted Powered Car Subwoofer.
- Enclosure is very shallow at only 3.15” tall so it can fit anywhere. You can fit it under seat but it also sounds great and takes up little space in your trunk.
- Enclosure is made out of solid cast aluminum. Peak Power Handling: 500 Watts. RMS Power Handling: 125 Watts. Heavy Duty Mounting Feet. PWM MOSFET Power Supply.
- Low Level RCA Input. High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit
- Overload Protection Circuit. Green Power/Red Protect LED. Phase Switch: 0° or 180°. Low Pass Filter: 50Hz - 180Hz. Bass Boost: 0 - 12dB @ 45Hz. Built in Subsonic Filter @ 20Hz
Skar Audio Dual 12" Complete 2,400 Watt SDR Series Subwoofer Bass Package - Includes Loaded Enclosure with AmplifierSkar Audio
705 ratingsMore info 3
- All-in-One Complete SDR Series Dual 12-inch Loaded Subwoofer Complete Bass Package
- Peak Power: 2,400 Watts | RMS Power: 1,200 Watts
- Includes x1 Skar Audio SDR-2X12D4 Dual 12" Loaded 2,400 Watt Vented Subwoofer Enclosure
- Includes x1 Skar Audio RP-1200.1D Class D 1,200 Watt Monoblock Car Subwoofer Amplifier
- Includes x1 Skar Audio SKAR4ANL-OFC 4 Gauge Premium OFC Complete Amplifier Wiring Kit
Kicker Dual 12-Inch 1200 Watt 2 Ohm Vented Loaded Subwoofer Enclosure, 44DCWC122,Black,31.88 x 13.2 x 17.25 x 16 inchesKicker
333 ratingsMore info 4
- ported enclosure with two CompC 12" subwoofers
- 2-ohm total impedance
- power handling: 600 watts RMS
300 ratingsMore info 5
- Rockville RBV10. 1A Single 10” 500 Watts Active Subwoofer Enclosure, Size: 10”, Peak Power: 500 Watts, RMS Power: 300 Watts, Nominal Impedance: Single 4-Ohm, 1. 5” Voice Coil, Inverted Carbon Graphite Molded Dust Cap, Kevlar Reinforced Pulp Cone, Double Lami
- Frequency Response: 35Hz - 200Hz, Sensitivity: 88dB, Anti-Vibration Braced MDF Cabinet, Angled Back Fits Perfectly Against Rear Seats, Computer Tuned Bass Reflex Port, Blue/Black Aviation Grade Tweed Carpet with Embroidered Rockville Logo.
- Class AB Amplifier, High Speed MOSFET Power Supply, High Level Speaker Inputs, Low Level RCA Inputs, Built-In Low Pass Crossover (30Hz - 160Hz).
- Accepts up to 8 Gauge Wire, 100mV - 5V Input Voltage, Power (Blue) & Diagnostic (Red) LED Indicators, 20A Fuse, Dimensions in inches: Length 15. 75" x height: 12. 99" x top width 10. 63" x bottom width: 14. 17", Weight: 22. 59 lbs.
34 ratingsMore info 6
- Features: Rockville VS10K54 Single 10" K5 1200w Car Subwoofer Pre-loaded In Vented Sub Enclosure, Peak Power Handling: 1200 Watts, Program Power Handling: 600 Watts, CEA Rated RMS Power Handling: 300 Watts
- Vent dimensions (inches): 2" x 6.5" x 8", Tuning frequency of enclosure: 35 Hz, 2" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire
- Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone – This cone is very efficient which makes the speaker sound louder even without requiring a lot of power to push it, Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
- Mounting Gasket with Rockville branding looks great and Makes it Easy To Mount the Subwoofer Air-Tight, High BL Magnetic Motor Gap, High grade black glue that handles extremely high temperatures which allows our woofer to handle even more power
- Detailed Info: Body: Non-Pressed Paper, Gap Plate Inside Diameter: 70mm (2.75 inches), Gap Plate Outside Diameter: 140mm (5.51 inches), Gap Plate Thickness: 25mm (0.98 inches), Yoke Outside Diameter: 130mm (5.11 inches)
5905 ratingsMore info 7
- 5/8" MDF Construction
- Frequency response: 10Hz - 150Hz. Aviation Grade Carpet
- Embroidered Terminator Logo; Impedance: 2Ω
- Combines the sleek looks and power of a Terminator mono block amplifier with either a sealed enclosure
- Houses two 12-Inch Terminator subwoofers, TNP212D2, or a vented enclosure
- Frequency response: 10Hz - 150Hz. Ideal solutions for anyone looking to add bass to their vehicle
- Ruggedly constructed using 5/8" MDF and aviation grade black carpet
Pioneer TS-WX1210AM 12” 1300 Max Power with Built-in Amplifier - Active Ported Pre-Loaded Enclosure SubwooferPioneer Corporation
38 ratingsMore info 8
- 1300 W Max Power (350 W Nominal) Pre-loaded 12" Injection Molded Polypropylene (IMPP) Composite Cone Construction Subwoofer
- Built-in 300 W Max (150 W RMS) Class D amplifier
- Ported enclosure design for powerful, deep and accurate bass response
- Variable Bass Boost (0 to +12 dB, 20Hz to 130Hz)
- The JBL Stage slim enclosure are designed to fit in just about any vehicle with simple installation. It is slim, sleek, stylish, and don’t sacrifice on sound.
- HARMAN standard reliability testing: Speakers are carefully tuned to assure high SPL and low distortion. This means that the usual specifications as well as speaker characteristics are considered when tuning for the JBL sound.
- JBL speakers have to undergo a rigid testing process that would destroy lesser speakers. JBL freezes them, bakes them, shakes them, blasts them with ultraviolet light and drives them at full power for days at a time.
- 500 watts of sheer impact: The Stage 1200D ported enclosure comes loaded with two of JBL's Stage 122AM 12" subwoofers, which handle up to 500 watts RMS together. The enclosure's 2-ohm impedance gets the most possible power out of your mono amp. The slot-ported enclosure is made from rugged 5/8" MDF covered with black carpet to withstand the bumps and bruises of life in a car. JBL tunes the enclosure for maximum performance, so you can count on impressive low-end punch.
- JBL 1 Year Manufacturer Warranty
Patioer 8'' Under-Seat Car Sub Woofer Modified Slim Subwoofer Speaker Stereo Audio Bass Amplifier 4Ω 480WSouthmanage Trading Co.,Ltd
15 ratingsMore info 10
- Box ultra-thin design: the effective saving of interior space, the appearance of the box with high-grade blanket fabric design, reduce resonance.
- The use of high-quality MDF board to ensure pure sound quality.
- The high power tube, has a short circuit reverse protection for the box.
- The star protective cover: the use of ABS plastic, play a collision protection role.
- Unique paper cone design, so that the bass is more robust, more stable performance. Any concerns or questions about this product, please contact us.