NANPU Zinc Alloy Desiccant Dryer, Compressed Air in Line Filter, Moisture Water Separator, Poly Bowl (1/4" NPT)
NANPU
10 ratings
More info
1
Product Features
- 【Designed for Drying】The Desiccant Air Dryer allows the Air to be Thoroughly Dried and Cleaned before it Enters your Pneumatic Tools. The Desiccant Beads need to be Added to the Metal Bowl. When it needs to be Replaced, the Beads will Change from Blue to Pink.
- 【Zinc Alloy Body】Higher Hardness and More Compression Resistance than Aluminum Alloy and Plastic Materials.
- 【Max Output Pressure】0-10 Bar (0-145 psi).
- 【Flow Rate】105 SCFM @ 90 psi (3000 L /Minute @ 6 Bar).【Temperature Range】 41-140°F(5-60℃).
- 【Accessories】2x 3.5oz (100g) Desiccant Beads Bag. 2 x 1/4" NPT Fittings, a pair of 1/4" NPT Brass Air Coupler& Plug Kit,1 x Thread Seal Tape.
3 Stage, Heavy Duty Industrial Grade Filter Regulator Coalescing Desiccant Dryer System For Compressed Air Lines, Metal Bowls, Great For Paint Spray And Plasma Cutter (3/4" Npt, Manual Drain)
THB_EDGE
566 ratings
More info
3
Product Features
- 3/4" Npt, Industrial Rated 3 Stage Combo Water Filter/ Pressure Regulator/ Coalescing Filter/ Desiccant Dryer System, With Wall Mounting Bracket And Manual Drain Stage 1
- 225 Psi Max Input. This Unit Will Regulator Your Incoming And Outgoing Air Pressure While Removing Moisture Water, Moisture Vapor And Oil From Your Compressed Air Lines, Then Finally Drying Out The Super Clean Air With An In-Line Desiccant Air Dryer
- Stage 1: Water Trap Filter / Pressure Regulator. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed Air Line. Regulator Adjusts Pressure From 7 To 215 Psi. 5Oz Metal Bowl With Visible Sight Glass.
- Stage 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 5Oz Metal Bowl With Visible Sight Glass. Red Indicator Pops Up When Time For Filter Change.
- Stage 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 5Oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Comes With 2 Bags Of Desiccant Beads.
NANPU 1/2" NPT Industrial Grade 3 Stage Air Drying System - Particulate Filter, Coalescing Filter, Desiccant Dryer & Air Regulator, Metal Bowl, Auto Drain, Suitable for Paint Spray& Plasma Cutter
NANPU
100 ratings
More info
4
Product Features
- 【High Pressure Resistance】Works Perfectly in the Pressure Environment of 30-175 psi; 【High Degree of Safety】Excellent Metal Bowl w/ Visible Sight Glass in Every Stage Protect You and the System throughout the Entire Process.
- 【Stage 1: Filter & Regulator】Compressed Air Water Trap Filter Equipped with 5 Micron Element, which has Excellent Filtering Performance, Much Longer Life and Reuse Feasibility, Remove Most of Moisture and Particles in the Air Line; Pressure Regulator Accurately Adjust and Stabilize the Air Pressure.
- 【Stage 2: Coalescing Filter】The Coalescing Filter is Equipped with a 0.01 Micron Element that can Remove 99.9% of Moisture, Smaller Particles and Oil, which Pass Through Stage 1 Combo. When the Filter Element needs to be Replaced, the Red Indicator will Pop Up.
- 【Stage 3: Desiccant Air Dryer】The Desiccant Air Dryer allows the Air to be Thoroughly Dried and Cleaned before it Enters your Pneumatic Tools. The Desiccant Beads need to be Added to the Metal Bowl. When it needs to be Replaced, the Beads will Change from Blue to Pink.
- 【Accessories】2 x 5 Micron Element(One of Them is Installed in the Product), 2 x 0.01 Micron Element (Same as Above), 4x 3.5oz (100g) Desiccant Beads Bag. 2 x 1/2" NPT Fitings, 1 x Thread Seal Tape.
Product Features
- Reduced energy use: efficient heat exchangers, a built-in stainless steel demister that removes all moisture and a fully adjustable programmable electronic drain valve reduce energy use and minimize air loss
- Built-in Reliability: corrosion-resistant heat exchangers, an enhanced control-system and high-efficiency moisture-separation ensure a steady long-term supply of dry air
- Smart control: easy to use, Advanced microprocessor control that lets you easily adjust and manage system parameters
- Wattage: 0.37
Air Compressor Water Separator, Heavy Duty Air Compressor Filter provides Clean Dry Air. Compressed Air Dryer with Drain Valve by LE LEMATEC
Ubiquitous
739 ratings
More info
6
Product Features
- The AI303 Air Compressor Water Separator filters out contaminants through the reusable 1 micron filter element, which is easily flushed out through the push button drain valve.
- Compared to other Air Compressor Filters, the LE LEMATEC AI303 provides a broad operating PSI range of 2-150 PSI with little to no lost pressure so you get the desired pressure delivered to your air tools.
- The air dryer for compressors. features a one way valve protecting air tools from dangerous backflow keeping your equipment in perfect working order.
- The Water Separator for air compressor is compatible with any air tool and compressor setup, complete with 1/4" NPT male and female connection points.
- Features a heavy duty yet compact design making the compressor air dryer tough enough for all shop conditions yet ergonomically designed not to get in your way.
In LINE Desiccant AIR Dryer for Compressed AIR Great for Pneumatic Tools Spray Booth Plasma Cutter, with Desiccant beads (3/8" NPT)
T-H-B
408 ratings
7
Product Features
NANPU DFR-03 3/8" NPT Air Drying System - Double Air Filters, Air Pressure Regulator Combo - Semi-Auto Drain, Poly Bowl
NANPU
1992 ratings
More info
8
Product Features
- 3/8" NPT Piggyback Air Filter/Regulator Combo
- Double 5 Micron Brass Filter Element, Excellent Filtering Performance, Much Longer Life and Reuse Feasibility
- Temperature Range: 41-140℉ (5-60℃);Flow Rate: 70 SCFM (2000 L /Minute)@ 90 PSI
- Max Supply Pressure:145 psi; Operating Pressure: 0-145 psi
- Includes Semi-Auto Drain & Polycarbonate Bowl with Metal Guard, 0-150 Gauge & Bracket,a pair of Air Coupler& Plug Kit, 2 x 3/8" NPT Fittings, 1 x Thread Seal Tape
1/2" NPT MID FLOW Filter Regulator Coalescing Desiccant Dryer System For Compressed Air Lines, Poly Bowls, Great For Paint Spray And Plasma Cutter (MANUAL DRAIN)
ALL Tool Depot
178 ratings
More info
9
Product Features
- PLEASE NOTE: 1/2" NPT MEASURES 0.850" OUTSIDE THREAD DIAMETER IN INCHES. 1/2" NPT, Industrial Rated 3 Stage Combo Water Filter/ Pressure Regulator/ Coalescing Filter/ Desiccant Dryer System, With Wall Mounting Bracket And Internal Float Drain (MANUAL DRAIN) STAGE 1
- 150 PSI Max Input. This Unit Will Regulator Your Incoming And Outgoing Air Pressure While Removing Moisture Water, Moisture Vapor And Oil From Your Compressed Air Lines, Then Finally Drying Out The Super Clean Air With An In-Line Desiccant Air Dryer
- STAGE 1: Water Trap Filter / Pressure Regulator. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed Air Line. Regulator Adjusts Pressure From 7 To 150 PSI. 5oz Poly Bowl With Visible Sight Glass.
- STAGE 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 5oz Poly Bowl With Visible Sight Glass. Red Indicator Pops Up When Time For Filter Change.
- STAGE 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 5oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Unit Comes With 2 Bags Desiccant Beads.
Product Features
- Reduced energy use: efficient heat exchangers, a built-in stainless steel demister that removes all moisture and a fully adjustable programmable electronic drain valve reduce energy use and minimize air loss
- Built-in Reliability: corrosion-resistant heat exchangers, an enhanced control-system and high-efficiency moisture-separation ensure a steady long-term supply of dry air
- Smart control: easy to use, Advanced microprocessor control that lets you easily adjust and manage system parameters
- Consistent clean, dry air: variable-speed fans reduce power consumption when units operate at less than maximum cooling capacity, while ensuring a consistent Dew point