PACE MBT 350 (MBT350) Multi-Channel Soldering Desoldering & Rework System with SX-100 Desolder Iron TD-100A Soldering Iron and MT-100 MiniTweez Thermal Tweezer
PACE INCORPORATED
2 ratings
More info
1
Product Features
- MBT 350, SYSTEM W/ TD-100, 115V
- Includes MBT 350 power supply, SX-100 desoldering iron and stand, MT-100 tweezer and stand, TD-100A iron and stand, 6993-0138-P1 tip maintenance station
- Soldering, desoldering, hot air
- Three, independently controlled channels
- All channels can be used simultaneously
FR301-03/P ESD Safe Portable Desoldering Tool with Precise Temperature Control °F /°C
American Hakko Products, Inc
957 ratings
More info
2
Product Features
- Easy-To-Use Adjustable Temperature Control Built Into The Handle
- Easy-To-Clean Solder Recovery Chamber Minimizes Maintenance And Reduces Waste
- Fast Release Tool For The Quick-Change Nozzle System
- Closed-Loop Sensor Integrated Heating System For Improved Thermal Performanc
WEP 948-III 2-IN-1 ESD Safe Desoldering Station and Soldering Station with Desoldering Gun, Soldering Iron, Sleep Mode, Temperature Calibration with 28 Pcs Accessories.
Guangzhou Yihua Electronic Equipment Co., Ltd.
6 ratings
More info
3
Product Features
- Desoldering: This desoldering station, with its 0.05MPA suction force and adjustable temperature from 716~896℉, provides easier through-hole component desoldering experience. This desoldering tool is especially suitable for through-hole desoldering operations for in-line sockets, LCD display, LED Nixie Tube and more.
- Soldering: The soldering station 's 110W heating element can heat up fast during use. Temperature is adjustable from 392~896°F. When heating, the built-in PID program will detect and compensate the temperature loss every 20 milliseconds to achieve fast temperature recovery. This soldering iron station can apply to most soldering situations, even for larger solder joints.
- 2 in one integrated. This multi-station allows you to use soldering station and desoldering station at the same time. When the solder joints require slightly more heat, you can use the soldering iron and desoldering gun together to heat up the solder joint fully before extracting the melted solder with the desoldering tool.
- Complete set of accessories. 100% metallic soldering iron stand ensures sufficient weight and width to store and support desoldering gun and soldering iron, thus preventing them from tipping over on your workbench. Full-fledged accessories kit including cleaning sponge, cleaning pins, filter springs, ceramic filters, carbon filters and solder storage chamber helps you collect and clean the residues with ease.
- This 2 in 1 soldering and desoldering tool is covered by our USA exclusive 1-Year product warranty, and our technical support team has your back with our 24-Hour support. NOTE: this product is rated for 110~127V USA Specification, DO NOT connect this device to a 220V power socket.
YIHUA 8786D I 2 in 1 Hot Air Rework and Soldering Iron Station with °F /°C, Cool/Hot Air Conversion, Digital Temperature Correction and Sleep Function
YIHUA
1708 ratings
More info
4
Product Features
- A Dual System with Advanced Designs - This station combines soldering station and hot air rework station for versatile uses when it provides dual display system & dual power switch and other advanced software functions. Comply with UL Standard(U.S.), Important Evaluation for Safety Electric Appliances.
- Intelligent Temperature Control - With the high-end precision PID program, the station can monitor and correct the actual temperatures at high speed with fast temperature compensation to provide the accuracy that your projects ask for.
- Anti-static Design/ ESD Safe Design - It can help prevent static or leakage damage to components.
- Exclusive Fail-Safe Protection- This is an upgraded & exclusive safety design. Should the hot air gun stop putting out air unusually during use, the program will automatically set an alarm and cut off the power to the heating element to ensure safety.
- Choose Yihua with confidence- this product includes quality accessories and tools to provide an optimal experience for your work. 12-Month USA Warranty (Exclusive). We provide professional assistance 24/7 on Amazon. Note: heating element and iron tip are consumable parts. If the station prompts 'S-E' code, please contact us and we will resolve the issue for you. This model works on 110-127V with its USA plug. CAUTION: MUST NOT be plugged directly into a 220V~240V electrical outlet
PS5 Charging Station,PS5 Controller Charger Station Supports Wall Mount,Fast Playstation 5 Dualsense Charging Station with Led Indicator,Overcharging Protection for Dualsense Docking Station
NINJACON
258 ratings
More info
5
Product Features
- 【A Must Have PS5 Accessories】The ps5 controller charger station can charge two playstation 5 controllers in 2.5-3hours at the same time, 1-2 hours faster than other PS5 chargers,aims to save your charging time. Plug and charge, easy to use. It is not only a charging dock,but also a fashionable controller stand.
- 【Wall Mount or Normal Stand】The ps5 charging station allow you to hanging it on the wall or place it on the desk. Wall mount is a creative design. We aim to design a strong, space saving and stylish ps5 dualsense charging station, basing on the principle of vertical high heels (Quarter Semicircle Design)- it takes up less space and more stable, with unique white high heel look,perfectly match the look and style of the PS5. Note: Wall mount stand is not suitable for wooden walls.
- 【Blue LED Atmosphere Light and Supports Official Program Upgrade】At the back of this PS5 Dual Controller Charging Stand ,there are 8 leds, illuminating blue lights, perfectly match the style of the PS5 and the game scene. And it also supports official program upgrade.
- 【Intelligent Protection and LED Indicator】This Playstation 5 dual charging station is built-in intelligent chip, providing intelligent overload protection, to protect your controllers from over-charging, over-voltage, overheat, and short-circuit, aims to extend the life of controller. Led indicators correspond to the charging status of the gamepad one by one, clearly get the each controller’s charging status. Red light means the controller is in charge, and the blue light means full charged.
- 【High Quality】PS5 charging dock is made of ABS material, which is flame-resistance and heat resistance, safer to use. With smooth charging surface, prevent your ps5 controller from scratches. And we attach a whole pad of anti slip rubber at the bottom of charging dock to make sure that it can hold two controller steadily.
Hot Air Rework Station, 858D SMD Desoldering-Gun (212-932°F) Kit with °F /°C Display, Temperature & Air Speed Adjustable, NOEVSBIG Heat Rework Station with 3 Air Nozzles
NOEVSBIG
212 ratings
More info
6
Product Features
- 【Heats Up Fast and Hot Enough】: Temp (MAX):500℃/932°F, (Temperature Range: 100 ℃/212°F to 500 ℃/932°F), Temperature range:±1℃/±2 °F. Two display temperature units are convenient to use in different places. Thanks to the improved heating element and heating system design, it can be heated up quickly and accurately, can up to the set temperature within 5-10 seconds.
- 【 High-quality Hot Air Gun】: Made of flame retardant material, and a built-in temperature protector can automatically cut off power when overheating occurs or the fans stop running due to the damage. safer! Intelligent Temperature Control without damaging any PCB board.Independent interface, easy to replace.
- 【Auto Sleep Function】: When the handle replaces on the bracket or <100°C/212°F, the heat gun would enter stand-by mode to stop heating. And it has a (temperature memory function), when you turn it on again, it will heat up to the set temp, convenient to use.
- 【Anti-static Design/ ESD Safe Design】: Anti-static type material shell and delta ground wire offer safety use, digital LED display to show real-time temp, very convenient. Included tools are of good quality and useful. 2 years of brand warranty for every order.
- 【Airflow Adjustable】: Airflow range (F1- - F8) which is adjustable and stable. NOEVSBIG rework station is capable of putting out 120L of hot air at a maximum stabilized temperature of 932°F. With this station, you can conduct rework operations on a broad range of components. Comes with three kinds of nozzles (big 8mm, medium 5mm, and small 3mm), can be easily replaced.
Lesnow Solder Sucker Desoldering Pump,Electric Soldering Iron Auxiliary Tool Manual Desoldering Suction Pump,Vacuum Pump Solder Removal Tool (1pcs Desoldering Pumps)
Lesnow-DP
117 ratings
More info
7
Product Features
- 1. Wide range of uses:Desoldering pump is widely used in the electronics and electrical industries, suitable for precision small devices, integrated circuit pins, home appliance repairs, digital repairs, etc., efficient and portable to remove waste tin residue.
- 2. Ergonomic design: Desolder pump adopts aluminum alloy shell, the operation is not slippery, the grip is comfortable, and the use is convenient.
- 3. High-quality suction nozzle: Good solvent resistance, lightweight design, easy to carry, suitable for long-term use, and improve work efficiency.
- 4. Strong suction power: Solder sucker desoldering pump adopts stainless steel push rod, internal spring adopts back pull design, instant suction power is strong.
- 5. Press lightly and quickly rebound: Desoldering suction pump adopts high-efficiency tin scraping method, which is easy to remove tin debris from the suction nozzle and not easy to block. If you have any product questions, you can contact us at any time.
Hot Air Rework Station with °F /°C Digital Display,NEWACALOX 858D Anti-static Desoldering-Gun Station( 212~932°F) with Air Speed Adjustable,3 Air Nozzles, IC Puller, Desoldering-Pump 700W
JLX factory
258 ratings
More info
8
Product Features
- 【Safer Hot Air Gun】: made by upgrading the ceramic heating core, the handle housing is made of flame-retardant material. The heat gun handle will enter the overheat protection and automatically cut off the power to prevent the handle temperature from being too high.
- 【Quick Heating】:Temp (MAX):500℃/932°F, (Temperature Range: 100 ℃/212 to 500 ℃/932°F) Noises:<45db, Temperature range:±1℃/±2 °F.it has temperature memory function( if turn off the station at 400°F, it will auto heat up to the 400°F when turning on again). Very convenient and simple to use, reducing trouble and improving work efficiency.
- 【Air-Gun Stand-by Function】: The air gun automatic function is a safety measure that ensures the heat is automatically cut off when the air gun is in its holder. When you pick up again, the temperature rapidly rises, and it can reach the set temperature only within 3-5 seconds.
- 【Airflow Adjustable】: big Lcd digital displays to show precision temperature for a hot air gun, airflow (F1- - F8) is adjustable, and 3 air nozzles direct a concentrated heat flow to the work surface of small chips to large chips. Air output is stable for different work, moderate volume, no excessive noise. The handle placement rack can be installed according to personal usage habits.
- 【What You Get】:Package Included - 1x 858D Soldering Station Unit 1x Hot Air Gun 3x Air Nozzles 1x Solder Sucker 1x Mini Screwdriver 2x Tweezers 1x Knife 1x IC Extractor 1x Manual. Offer 3 years brand after-sales service support.NEWACALOX 858D desoldering station has a fuse and uses an insulated triangular plug(we have used the correct ground Power Cord. If you receive the wrong one, we will send a free replacement).
Pro Digital Vacuum Desoldering Station, Anesty Professional Removal Rework Station ZD-915 Iron Gun Built-in Vacuum Pump
Anesty
300 ratings
More info
9
Product Features
- (Reminder: Tips are pre-soldered, please allow a few minutes for the element to heat up prior to use) The vacuum desoldering station is especially designed for lead free desoldering. The unit provides rapid heating and high power, allowing the user to desolder all types of DIP components
- Solid structure, single hand operation, and strong absorbing power, allow easy removal of the residual solder from single and double-sided PC boards
- The desoldering gun is controlled automatically by micro-processor
- The heating element is made of PTC and the sensor on the de-soldering tip can control the desoldering temperature quickly and accurately
- The Pro Digital Vacuum Desoldering Station comes with 1-year warranty and 60-day money-back guarantee
YIHUA 948 Upgraded 2 in 1 ESD Safe 80W Desoldering Station and 60W Soldering Iron- Desoldering Gun and Soldering Station °F /°C
YIHUA
234 ratings
More info
10
Product Features
- One Unit, Two Tools - A Good Combination of Desoldering Station(80-watt high power) and Soldering Station (60 watts). And it's compact with user-centric design features - Sleep Function; Digital Temperature Correction; Celsius/Fahrenheit Display.
- Intelligent Heat Control - Upgraded with Precision PID Temperature Control. The program can track the actual temperatures of both desoldering gun and soldering iron rapidly. Then provides real-time correction. The compensation speed is vastly superior to similar products. This allows for minimal temperature error to achieve the essential stability.
- Intelligent Detection Mechanism - The station can self detect its part's status or change and send you the information. Automatic identification aside, the machine provides messages like "S-E" (meaning the sensor part is faulty), "Pht"( indicating the station is preheating the gun properly ). Coupled with available replacement, you can keep track of its status or give it a timely resolution.
- How To Use Desoldering - The station will preheat for around 5 minutes when turned ON, and beep 3 times when the station is ready to go. Pulling the trigger during preheating will trigger protection code 'Pht', the vacuum pump is turned OFF by default during preheating. This allows the station to heat the internal desoldering mechanism sufficiently to provide better heat transfer and quicker recovery time. So, the desoldering gun won’t clog up due to misuse under insufficient heating.
- Choose YIHUA with confidence- this product includes quality accessories and tools to provide an optimal experience for your work. 12-Month USA-exclusive Warranty. Plus, our team is providing professional assistance 24/7 right on Amazon. Questions and Suggestions are welcome. NOTE: Spare parts are readily available in this store. This model works on 110-127V with its USA plug. CAUTION: MUST NOT be plugged directly into a 220V~240V electrical outlet