Product Features
- Large 3-1/2 inch gauges feature a chrome bezel and rugged protective outer boot
- High pressure gauge reads 0-400 psi and 0-2800 kPa
- Low pressure gauge reads 0-100 psi and 0-700 kPa
- Both gauges include rear hook to allow gauge to be hung conveniently out of the way
- Gauges and hose assembly incorporate quick couplers for easy disconnect
OEMTOOLS 25254 Oil Pressure Switch Socket, 1/2 Drive | Fits 1 Inch and 1-1/16 Inch Oil Pressure Switches | Accepts Oil Pressure Sending Units Up to 2-5/8 Inches Long | Chromed Steel
Moen Incorporated
710 ratings
More info
2
Product Features
- Protect Your Engine: The oil pressure switch keeps your engine oil pressure from getting too high; Switching out faulty oil pressure switches is a simple but crucial way to protect your engine
- Simple Repair: Using this oil pressure switch, or oil sending unit, socket to remove and replace a faulty oil pressure switch is one of the simplest home vehicle repairs possible
- Must-Have Tool: Our oil pressure switch socket can remove and replace most 1 inch and 1-1/16 inch oil pressure switches up to 2-5/8 inches long
- Durable and Professional: This socket is composed of chrome-plated steel, making it both super strong and easy to clean; Accepts oil pressure sending units up to 2-5/8 inches long
- Full Specifications: Fits most 1 inch and 1-1/16 inch switches, and 1/2 inch chamfered square drive; Chrome plated for professional look and easy clean-up
YSTOOL Oil Pressure Tester Kit Professional Oil Pressure Gauge Tool for Engine Diagnostic Test with Hose Adapters and Carry Case for Cars ATVs Trucks Use 0-140psi
YSTOOL
200 ratings
More info
3
Product Features
- The engine oil pressure tester kit is used to diagnose and test the engine oil pressure value, to check whether it is normal. Prevent engine failure due to lack of oil. And with this best in class tools, you can get a definite pressure value well without relying on the dashboard light.
- There are 10 types of thread adapters are suitable for most cars, motorcycles, boats and other vehicles with gasoline and small diesel engines. As long as the adapters can match with your engine and oil pressure does not exceed 140 PSI. The 10 adapters are marked with number, you can choose the right one very easy.
- The pressure gauge uses metal gauge head with shockproof rubber cover, 3" big dial with clear dual scale range 0 to 140 PSI and 0 to 10 Bar. Compare to a large range, this oil pressure gauge is easy to read about 1-2 Bar with a short range. There are a straight quick coupler and a elbow one in the case, you can choose it according to the location of the engine oil pressure test port.
- Steel adapters, brass quick couplers, are featured with high hardness, rustless, durable and good air sealing. The 4FT long hose is made of rubber nylon resin with MAX. working pressure 300 PSI. There are also a small bag of seal gaskets, which are used for replacing the ones on adapters.
- For 30 days after purchase, return your undamaged products and you will receive a full refund. For 1 year after purchase, we will deal with all quality-related issues by part of REPLACEMENT OR REFUND. Please feel free to purchase. Please contact us by Amazon message system if there is any question, we will reply in 24 hours
GearWrench - KDT-3289 GEARWRENCH Oil Pressure Check Kit, 10 Piece (Pack of 1)
GEARWRENCH
90 ratings
More info
4
Product Features
- Test engine oil pressure at the oil filter on most passenger cars and light trucks
- Five different adapters are included for both domestic and imported engines
- Gauge is calibrated to read max pressure from 0 to 100 PSI
JIFETOR Oil Pressure Tester Kit, Professional Engine Diagnostic Test, 100PSI Pressure Gauge Tool with Hose Adapter for Truck Car ATV
JIFETOR
117 ratings
More info
5
Product Features
- OIL PRESSURE TEST AND DIAGNOSTIC: JIFETOR engine oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc.
- FITMENT TYPE: The oil pressure test tool includes 3 sizes (1/8" NPT, 1/4" NPT, 3/8" NPT) selectable brass adapters, can be connected to the corresponding sizes oil pressure test service port, on most gasoline or small diesel engine, includes car, motorcycle, ATV, truck and so on, which oil pressure not exceeds 100psi.
- PRESSURE GAUGE AND HOSE: Pressure gauge adopts rubber cover protected 3" large dial. 0-100psi and 0-7bar small scale range with big dial, very easy to read. No pressure holding function, return to zero automatically. The 30" long rubber nylon resin hose, is equipped with a 1/8" NPT brass adapter, can be connected to 1/4" NPT and 3/8" NPT adapters directly. Max working pressure: 300psi
- EASY TO OPERATE: When you want to test the oil pressure by this engine oil pressure diagnostic gauge, disassemble the oil pressure sensor first, then screw on the oil pressure gauge, start the vehicle to operate it at a specified speed, the reading in the pressure gauge is the oil pressure of lubrication system. Please refer to equipment manufacturer's operation instruction and compare to the manufacturer's recommended readings
- SATISFACTORY CUSTOMER SERVICE: 30 days full refund with returned undamaged JIFETOR engine oil pressure test gauge. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours.
JoyFans Oil Pressure Tester Tool, 0-140PSI Oil Pressure Gauge Kit for Fuel System Mechanical Sensor Engine Cylinder Compression Test with Hose Adapters for Cars ATVs Trucks Use Red Case
JoyFans
60 ratings
More info
6
Product Features
- Fuel Injector Pump Pressure Check: Engine oil pressure test tool kit is designed to test oil pump pressure and check operation of fuel system components. Compare the measured pressure value to the standard reference range from manufacturer, we can take quick and accurate diagnosis and feasible solution on the oil pipeline leakage and engine wear, so as to confirm if the oil pressure gauge has been damaged. No more reliance on the dashboard light.
- Oil Pressure Tester: The petrol engine cylinder tester kit has a shockproof rubber casing and a large clear dial with readings from 0~140 psi and 0~10 bar for easy and accurate work on both American and metric systems. Keeping the gauge safe from bumps and drops. Built-in hose assembly also comes with a side pressure relief button for instant pressure reset and no repeated hose disconnect, and 4 ft long flexible hose with convenient quick coupler for simple adapter installation and removal.
- Durable Construction: 11-piece metal adapters are all made with heavy-duty forged steel and brass hardened for maximum strength and longevity; designed to withstand extreme pressure in any situation for professional use. Each thread adapter marked with number, features black oxide finish to resist rust and corrosion; and the 90° coupling adapter prepared for limited access applications. Reinforced gauge hose uses ruber nylon resin material and has max working pressure 300 psi.
- Wide Range of Application: If you are looking for a reliable auto fuel system oil pressure kit, this is exactly what you need. Oil pressure gauge tester kit comes with 1pc oil pressure gauge, 1pc 90° elbow fitting, 10pcs steel adapters and spare seal gaskets; Ideal for use on most types of domestic and imported cars, motorcycles, boats and other vehicles with gasoline engines and small diesel engines. Always notice the low pressure range of this oil pressure sensor test kit.
- Thoughtful Service: We are always trying hard as we can to provide customers with better quality products and services. Help you to complete the satisfactory shopping experience and tool selection. The item will be packed well to prevent the breakage along the way. If you have any questions, please feel free to contact us. Goods purchased in this store is refundable within 30 days as long as it's intact, and we provide 12-month after-sales quality support.
JIFETOR Engine Oil Pressure Gauge Transmission Fluid Diagnostic Tester Tool Kit 12PCS, 500psi Automatic Gearbox Pressure Meter with Hose and Adapters
JIFETOR
202 ratings
More info
7
Product Features
- ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This engine transmission oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc.
- EASY TO TEST ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the oil pressure test with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the oil pressure tester, replace the low oil pressure switch, then done.
- FITMENT TYPE FOR JIFETOR OIL PRESSURE GAUGE KIT: This oil pressure test tool kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on.
- TRANSMISSION FLUID PRESSURE GAUGE AND HOSE: The engine oil pressure tester gauge adopts rubber cover protected 3-1/2" large dial. 0-500psi and 0-35bar big scale range, is more suitable for testing big engine. No pressure holding function, return to zero automatically. The 40" long rubber nylon resin hose, is equipped with a 1/8" NPT brass adapter. Max working pressure: 500psi
- SATISFACTORY CUSTOMER SERVICE: 30 days full refund with returned undamaged JIFETOR automatic transmission pressure tester gauge set. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours.
Product Features
- FUNCTION: Tests oil pump pressure and also low oil warning devices.
- APPLICATION: Fitted with quick coupling adaptors and 1200mm of hose.
- INCLUDING: 90 degree coupling adaptor for limited access applications.
- This oil pressure test kit contains a wide assortment of durable brass adapters designed to fit mot import/domestic engines. This is a great kit for DIY auto tools, to test engine oil pressure quickly and accurately.
- Gauge fitted with heavy-duty cover. All products are 100% brand new. If you think the item you received is used, please contact us for a replacement.
Mekar for Kent Moore Tool EN-47971 Oil Pressure Gauge Adapter for Generation 4 & 5 V8 Engines (Blue)
Mekar
48 ratings
More info
9
Product Features
- Suitable for Generation IV&V V8 Engines
- Providing ports to attach oil pressure tester
- Dual port for bottom or side tester connection
- EN-47971 is installed in place of the spin-on oil filter, and allows existing oil pressure gauge to be attached for engine oil system diagnosis.
- Package Include: 1pcs Oil Pressure Gauge Adapter
Lang Tools TU-16A Quick Change Automatic Transmission to Engine Oil Pressure Tester
Lang Tools
5 ratings
More info
10
Product Features
- Checks engine oil pressure and automatic transmission pressure on domestic and foreign cars, trucks, motorcycles, etc.
- 21 color- coded standard and metric fittings
- 2-1/2" gauge has a dual scale dial with ranges from 0-100 PSI and 0-28 bar
- 3-1/2" gauge has a dual scale dial with ranges from 0-400 PSI and 0-28 bar