Fasco Epoxies 110 Epoxy Glue Quart Kit (Wood, Aluminum, Fiberglass)
Fasco Epoxies Inc.
18 ratings
More info
1
Product Features
- Adhesion - Unusually high adhesion to concrete, stone, wood, metal, glass, ceramic, rubber and a wide variety of plastic materials.
- Cohesion - When the resin is properly cured, the cohesion strength within the bond line is so strong and the adhesion of the epoxy to the materials so great that stress failure will often occur in one of the materials being bonded rather than in the epoxy.
- Shrinkage - Epoxy Glue cures with only a small shrinkage compared to other adhesives. As a consequence, less strain occurs at the bond line and it is stronger. Shrinkage is held to a fraction of 1%. . Stability - Epoxy glue maintains its dimensions and shape under prolonged stress. The stability combined with outstanding tensile, shear and impact strength makes epoxy glue unique among adhesives.
- Resistance - Unlike most adhesive materials, epoxy glue is highly resistant to moisture. Its resistance to solvents is outstanding.
- Insulation - Epoxy glue is an excellent insulator to both heat and electric current.
Star Brite Epoxy Aluminum Putty Stick Permanent Emergency Repairs 087004
Star Brite
7 ratings
More info
2
Product Features
- Makes permanent and emergency repairs on aluminum boats, outdrives, fuel and water tanks and other aluminum parts.
- Easy to use; just hand knead for 1 minute and apply to damaged area.
- Can be sanded, drilled and tapped
- ***SHIPS FROM FLORIDA***
TotalBoat-409337 TotalFair Marine Epoxy Fairing Compound for Fiberglass, Wood, Aluminum and Steel (Gallon Kit)
TotalBoat
174 ratings
More info
3
Product Features
- HIGH-STRENGTH, LIGHTWEIGHT TWO-PART EPOXY FILLER smooths out the rough spots and fills the voids; ideal for filling and fairing dents, holes and gouges on your boat, canoe or other watercraft. Marine-grade putty is also great for home, rv and auto repair
- SUPER SMOOTH FINISH FOR PERMANENT, WATERPROOF REPAIRS: Marine filler bonds strongly to damaged areas and cures without pinholes on wood, aluminum, steel and fiberglass repair areas; cured TotalFair is waterproof; use above and below the waterline
- EASY TO MIX AND APPLY: Foolproof 1 to 1 mix ratio - just mix the blue and yellow components until they turn green. Creamy smooth consistency makes it easy to spread and feather to a fine edge; won't sag on vertical and overhead surfaces
- CURES FAST. EASY TO SAND AND PAINT: Quick-drying compound is ready to sand in just 3 hours at 80°F; cured fairing compound sands easily; compatible with latex and epoxy primers and paints
- CHOOSE KIT SIZE: 2-PINT KIT, 2-QUART KIT or 1-GALLON KIT. NOTE: TotalBoat Gelcoat should not be applied directly over TotalFair or gelcoat will not cure properly. Before applying gelcoat, apply TotalBoat 2-Part Epoxy Primer or TotalProtect over TotalFair
Product Features
- Two-part epoxy cold weld system specially formulated for marine applications
- Great for bonding aluminum, metal, composites, fiberglass and more
- Sets in 4-6 hours at room temperature and cures dark grey in 15-24 hours
- Once cured, it can be shaped, tapped, filed, sanded and drilled and will retain its strength above or under water
- J-B Weld is proudly made in the USA
Eastwood Gray Epoxy Steel Aluminum Fiberglass Primer and Sealer Quart 1:1 Corrosion Resistance
Eastwood
117 ratings
More info
5
Product Features
- Fast Drying & Maintains Good Color Holdout
- Can Be Used As A Primer Or Sealer, Excellent Adhesion and Corrosion Resistance
- Requires Activator 50243ZP
- Applied Over Steel, Aluminum, Fiberglass, Body Fillers, Existing Finishes
- Fast Drying & Maintains Good Color Holdout
Fasco Epoxies 110 Epoxy Glue Pint Kit (Wood, Aluminum, Fiberglass)
Fasco Epoxies Inc.
27 ratings
More info
6
Product Features
- Adhesion - Unusually high adhesion to concrete, stone, wood, metal, glass, ceramic, rubber and a wide variety of plastic materials.
- Cohesion - When the resin is properly cured, the cohesion strength within the bond line is so strong and the adhesion of the epoxy to the materials so great that stress failure will often occur in one of the materials being bonded rather than in the epoxy.
- Shrinkage - Epoxy Glue cures with only a small shrinkage compared to other adhesives. As a consequence, less strain occurs at the bond line and it is stronger. Shrinkage is held to a fraction of 1%. . Stability - Epoxy glue maintains its dimensions and shape under prolonged stress. The stability combined with outstanding tensile, shear and impact strength makes epoxy glue unique among adhesives.
- Resistance - Unlike most adhesive materials, epoxy glue is highly resistant to moisture. Its resistance to solvents is outstanding.
- Insulation - Epoxy glue is an excellent insulator to both heat and electric current.
Epoxy Glue Adhesive C-Tough by CECCORP (4.25 Oz Combined) – Epoxy Adhesive for Metals, Aluminum, Fiberglass, Masonry, Wood, Stones, Concrete and Some Plastics – Waterproof – Shock Resistant till -45°C
Chemical Engineering Canada Corporation
456 ratings
More info
7
Product Features
- ★ Easy To Use: Volume Ratio of 1:1, Long Working Time (30-35 Minutes). Full Cure After 24 Hours, High Strength Bonding of Dissimilar Materials such as Metal (Aluminum, and Stainless Steel), Ceramic, Wood, Concrete, Fiberglass, Stone, Glass, Some Plastics, Carbon Fiber, and Many Others.
- ★ Common Uses: Knife Handle, Boat Patching, Aluminum, Fiberglass and Carbon Fiber Bonding, Golf Reshafting, Wooden Boat Manufacturing, Concrete, and Canoe Repairs, RC and Aircraft Modelling.
- ★ Permanent Waterproof, Non-Brittle, Shock Resistant down to -45°, Mixes Easily with Pigments, Microbubbles and Fillers.
- ★ Industry Uses: Automotive, Marine, Construction, Electronic, Composite.
cho26key Gaming Keycaps for Cherry MX Switches(OEM R4) Hand Made Resin Key caps… (Black Koi（R4）)
Steppenwolf-shop
108 ratings
More info
8
Product Features
- Condition:Keycaps are made of premium quality resin to ensure endless amounts of gaming.
- Fit for:Fits most mechanical keyboards with Cherry MX switches.
- Little differences could be found as all cho26key keycaps are crafted by hand.
- Package Included:Keycap x 1(keyboard not)
- When the keycap is installed on the keyboard, it is found to be too tight or too loose, please do not install it forcibly. You can use a hair dryer against the cross socket part of the keycap and heat it for about 5 seconds to make the base slightly softer. Then plug it into the shaft of the keyboard.
KEEN Utility Men's Sparta Low Alloy Toe ESD Work Shoe, Black/Grey Flannel, 10 Wide US
KEEN Utility
908 ratings
More info
9
Product Features
- Alloy Toe: Left and right asymmetrical aluminum safety toes weigh 35% less than steel toes, and meet or exceed ASTM F2412 and F2413 ESD 100 standards
- ESD Shock Reduction: Electro static dissipative (ESD) footwear is constructed to reduce excess static electricity by conducting the charge from the body to the ground when working around electronics, technology, and other machinery
- Traction: Oil- and slip-resistant, non-marking, siped, rubber outsoles for improved traction that meet or exceed ASTM F1677-96 and F2913 SATRA standards
- Support & Comfort: Features KEEN.ReGEN technology; a lightweight, compression-resisting midsole providing 50% more energy return than standard EVA foam making safety footwear more comfortable. Includes removable PU insole
- Additional Features: Breathable mesh upper keeps your feet cool in warmer temperatures and non-mutilating upper reduces the change of marking or scratching surfaces when working around sensitive or expensive parts
STAR BRITE Epoxy Aluminum Putty Stick - Make Fast, Permanent Repairs - Even Underwater - Aluminum4 OZ. (087004)
Star brite
555 ratings
More info
10
Product Features
- Works underwater! Every boater should have this onboard for emergency and permanant repairs
- Easy to use - hand knead for 1 minute and apply to damaged area
- Bonds in 5-10 minutes - Steel hard in 30 minutes Fully cured in 60 minutes and can then be sanded, drilled and tapped
- Special additives cut through oxidation and anodization to maximize bonding to weathered aluminum
- Withstands high temperatures and pressures making it ideal for manifolds, mufflers, & drive units
