10 Best Heat Pump For Houses

Product Features

Product Features

• ETL Listed For Use In Damp Locations
• Meets ASSE-1060 Requirements
• Built-in Thermostat with Frost Protection (40° to 90°F)
• Incoloy 840 Supperalloy, Corrosion Resistant Element
• Convection/Radiant Heat
• Horizontal or Vertical (up to 500W) Mount
• Proudly Made in the USA with U.S. & Global Materials
• 1-Year Limited Warranty

Product Features

• The recirculating pump uses a heavy-duty stainless steel pump head with aluminum pump housing, PES impeller, features high resistance to stain and corrosion, operates on 120 volts, weighs 8.5 pounds, and measures 6.2 x 6.0 x 5.0 inches
• System includes pump, 24hr programable timer, sensor valve with thermal actuator, 10ft power cord, adapters with rubber washers, valve mounting screws, and two 12-inch supply lines; easy installation to existing plumbing and maintenance free
• Extremely quiet and energy efficient this system supplies instant hot water in about 15 seconds at every faucet or shower when needed and helps eliminate wasted water using thermal by-pass technology with no return line or under-sink outlet required
• A sensor valve opens when the water on the hot water side cools, pushes the cool water back to the water heater, and closes when hot water line hits 98º F; if multiple hot water loops present a Watts Premier Sensor Valve Kit needed (sold separately)
• Pump mounts directly onto water heater, can be used with all types of pipe, and is only for indoor use on standard tank water heaters for residential buildings; cannot be used with tankless water heater or outdoors

Product Features

• Accessories such as Linesets, thermostats, LP conversion kits, Sold Separately
• ACCESSORIES - Sold separately unless specified in this listing
• Uses the HKSC/HKSX series of heat kits; NOT the HKR series

Product Features

• ETL Listed For Use In Damp Locations
• 304 Stainless Steel Construction
• Meets ASSE-1060 Requirements
• Built-in Thermostat with Frost Protection (40° to 90°F)
• Incoloy 840 Supperalloy, Corrosion Resistant Element
• Convection/Radiant Heat
• Horizontal or Vertical (up to 500W) Mount
• Proudly Made in the USA with U.S. & Global Materials
• 1-Year Limited Warranty

Product Features

• 【Handy Pump with Stable Performance】1/6 horse power energy-efficient motor with thermal overload protection for safety and longer lifetime, has the ability to remove maximum 1100 gallons of water in one hour horizontally. Quietly running.
• 【Efficient Manual Drain Pump】It works by simple plug-in operation, ideal for removing clean water can remove water level down to 1/12". Screened inlet prevents large solids from entering pump. Not suitable for dirty water.
• 【Easy to Install】Attached adapters for easy hookup with hoses for quick draining. There are two plastic hose adapters included, GHT 3/4" for garden hoses, and 1" for PVC lay flat hoses. *This item is not suitable for dirty water and working with expandable hoses.
• 【Small Pump with Portability】It features portability with small size: 5.9 in round*8.3 in height. You can easily put it to transfer water anywhere with no hassle and stock it to your storeroom after use but would not occupy much space.
• 【Suits to Various Pumping Conditions】The submersible pump is designed for water removal in home applications. Pump can be used for sump service and dewatering. Unit is constructed of hi-impact corrosion resistant plastic.
• 【Customer First】One year worry-free warranty ensured. For any question, please don't hesitate to write to us through our storefront and click "ask a question", or support email to us, we will respond within 24 hours.

Product Features

• Fits Chevy Silverado/GMC Sierra 2500HD V8 6.6L 2005-2013,Chevy Silverado/GMC Sierra 3500 2005-2007 Fuel Filter Housing OEM w/ LLY LBZ LMM.Replaces GM 12642623.Won't work on 2001 2002 2003 2004.5(But if you modify or lengthen the hoses(Not recommend),you can use this unit constrainedly).
• The black base was made of billet aluminum,we used the electrophoresis process to protect it from oxidation and corrosion,it's easy to clean.Also includes a heater plug.
• The aluminum air bleeder screw which replaced plastic OEM screw was more durable.
• The hand fuel pump and two tubes were made of iron,oxidation surface treatment,can effectively prevent corrosion and easier to clean.
• The parts of the OEM are the same with our previous one,so our updated one can solve the problem of OEM’s,too.

Product Features

• Rated power: 93/67/46 W. NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Max pressure: 145 psi (10 bar),the circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft);Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia.
• Easy installation, only need a wrench to connect the pump to the pipeline, saving you the cost of plumbers; Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water.
• Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm.
• The circulation water pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas.
• KOLERFLO circulation water pump RS15-6 Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on.

Product Features

• ETL Listed For Use In Damp Locations
• Meets ASSE-1060 Requirements
• Built-in Thermostat with Frost Protection (40° to 90°F)
• Incoloy 840 Supperalloy, Corrosion Resistant Element
• Convection/Radiant Heat
• Horizontal or Vertical (up to 500W) Mount
• Proudly Made in the USA with U.S. & Global Materials
• 1-Year Limited Warranty

Product Features

• ETL Listed For Use In Damp Locations
• 304 Stainless Steel Construction
• Meets ASSE-1060 Requirements
• Built-in Thermostat with Frost Protection (40° to 90°F)
• Incoloy 840 Supperalloy, Corrosion Resistant Element
• Convection/Radiant Heat
• Horizontal or Vertical (up to 500W) Mount
• Proudly Made in the USA with U.S. & Global Materials
• 1-Year Limited Warranty