ACTOOL 1-1/4" Diameter × 2" Depth of Cut HSS ANNULAR Cutter with 3/4'' Weldon Shank
ANKA TOOL
31 ratings
More info
1
Product Features
- 1-1/4" Diameter x 2" Depth of Cut include free Pilot Pin
- Made of tough M2 High Speed Steel for longer tool life, superior Heat-Treat for maximum durability.
- Cut holes in steel quickly, precisely and safely. It is much more efficient than regular drill bits. Ideal for clean and burr-free cutting.
- 3/4" Weldon shank with 2 flats - fits most major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders.
- Can widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form.
Annular Cutter Set 13 Pcs by S&F STEAD & FAST, Cutting Depth 1" Cutting Diameter 7/16" to 1-1/16" Inch, Mag Drill Bits Kit for Magnetic Drill Press, with 2 Pilot Pins
S&F STEAD & FAST
13 ratings
More info
2
Product Features
- Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
- 11 HSS core drill bit cutting tool assortment set with Outside Diameter in inches: 7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16",1 inch cutting depth for each drill cutter
- CNC-machined high precision annular drill bit set with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results
- Compatible with various brands of magnetic drills including Alfra, BDS, Dewalt, Euroboor, Hougen, Ruko. Caution: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor for the drill bit cutter. Arbor is not included in this pack
- Sturdy good-looking case holding an assortment of 11 annular bits, 2 pilot pins and a bonus hex wrench
Annular Cutter Set 13 pcs JESTUOUS 3/4 Inch Weldon Shank 1 Cutting Depth and Cutting Diameter from 7/16 to 1-1/16 for Drill Press HSS Standard Kit Two Flat with 2 Pilot Pins
Tungsten technology inc
156 ratings
More info
3
Product Features
- 1.Annular cutters are compatible with almost all major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders.
- 2.Made of tough high speed steel material, with longer service life and high heat resistance.
- 3.Applicable materials include wood, various steel materials,steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN.,etc.
- 4.The biggest advantage of HSS annular slugger drill cutter bits is its ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.
- 5.Includes 11 cutters ( Cutting Diameter:7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16"), 2 pilot pins (4.74x77mm,6.35x77mm) & 1 plastic tool carrying case.
Annular Cutter Set 6 Pcs, Weldon Shank 3/4”, Cutting Depth 1”, Outside Diameter 1/2 to 1-1/16 Inch, Mag Drill Bits Kit for Magnetic Drill Press by S&F STEAD & FAST
S&F STEAD & FAST
94 ratings
More info
4
Product Features
- Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
- 6 HSS core drill bit cutting tool assortment set with Outside Diameter in inches: 1/2, 9/16, 11/16, 13/16, 15/16, 1-1/16,1 inch cutting depth for each drill cutter
- CNC-machined high precision annular drill bit set with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results
- Compatible with various brands of magnetic drills including Alfra, BDS, Dewalt, Euroboor, Hougen, Ruko. Caution: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor for the drill bit cutter. Arbor is not included in this pack
- Sturdy plastic case holding 6 annular bits, 1 pilot pin, 1 hex wrench
Annular Cutter JESTUOUS 3/4 Inch Weldon Shank 2 Cutting Diameter 2 Cutting Depth with Pilot Pin Slugger Bits Two Flat HSS Kit for Magnetic Drill Press,1 Piece
Tungsten technology inc
20 ratings
More info
5
Product Features
- Annular cutter are compatible with almost all major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders.
- Made of tough high speed steel material, with longer service life and high heat resistance.
- Applicable materials include wood, various steel materials,steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN.,etc.
- The biggest advantage of HSS annular slugger drill cutter bits is its ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.
- Includes 1 annular cutter and 1 pilot pin(6.34*103mm) with plastic case.
Annular Cutter 1/2" Diameter x Depth of Cut 2", Mag Drill Bits by S&F STEAD & FAST
S&F STEAD & FAST
36 ratings
More info
6
Product Features
- Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
- HSS annular drill bits with Outside Diameter 1/2 inch with 2 inch cutting depth
- CNC-machined high precision drill bit cutter with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results
- Compatible with various brands of mag drill including Alfra, BDS, Dewalt, Fein, Euroboor, Hougen, Ruko. Caution: if you want to use this 2 inch annular cutter on a drill press, you need an extra annular cutter arbor for the 2 inch bit. Arbor is not included in this pack.
- Sturdy plastic case holding one annular cutter, one pilot pin
Evolution CC625 5/8-Inch Diameter x 1-Inch Depth of Cut Cyclone High Speed Steel Annular Cutter
Evolution Power Tools
337 ratings
More info
7
Product Features
- 5/8" Diameter x 1" Depth of Cut
- M2AL High Speed Steel
- 3/4" Weldon shank with 2 flats - fits most standard magnetic drill presses
- Includes free pilot pin
ACTOOL 5/8" Diameter × 2" Depth of Cut HSS ANNULAR Cutter with 3/4'' Weldon Shank
ANKA TOOL
55 ratings
More info
8
Product Features
- 5/8" Diameter x 2" Depth of Cut include free Pilot Pin
- Made of tough M2 High Speed Steel for longer tool life, superior heat treated for maximum durability.
- Cut holes in steel quickly, precisely and safely. It is much more efficient than regular drill bits. Ideal for clean and burr-free cutting.
- 3/4" Weldon shank with 2 flats - fits most major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders.
- Can widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form.
Steel Dragon Tools® 13pc. High Speed Steel HSS Annular Cutter Kit 1" Depth and 7/16 in. to 1-1/16 in.
Steel Dragon Tools
49 ratings
More info
9
Product Features
- Kit includes 11 high-speed steel annular cutters and two (2) pilot pins.
- Bit sizes included: 7/16 in., 1/2 in., 9/16 in., 5/8 in., 11/16 in., 3/4 in., 13/16 in., 7/8 in., 15
- Cutting Depth: 1 in.
- 3/4 in. Weldon Shank
- Large holes can be drilled up to ten times faster than regular drills bits
ACTOOL 3/4" Diameter × 2" Depth of Cut HSS ANNULAR Cutter with 3/4'' Weldon Shank
ANKA TOOL
34 ratings
More info
10
Product Features
- 3/4" Diameter x 2" Depth of Cut include free Pilot Pin
- Made of tough M2 High Speed Steel for longer tool life, superior heat treated for maximum durability.
- Cut holes in steel quickly, precisely and safely. It is much more efficient than regular drill bits. Ideal for clean and burr-free cutting.
- 3/4" Weldon shank with 2 flats - fits most major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders.
- Can widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form.
