Product Features
- Use this cantilever mount for mounting 1-inch telescopic sights
- The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement
- The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces
- Aluminum construction
Vortex Optics Hunter 1-inch Riflescope Rings - High Height (1.22 inches)
Vortex Optics
1424 ratings
More info
3
Product Features
- These Vortex Hunter Rings position the center of the riflescope tube at a height of 1.22 inches (31.0 mm) from the base.
- Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups.
- Made from aircraft-grade 6061-T6 aluminum for optimum strength.
- Sold two rings per package.
Monstrum Extended Series Offset Picatinny Scope Mount for Long Range Scopes | 1 inch Diameter | Black
Monstrum
213 ratings
More info
4
Product Features
- Built specifically for long range scopes - 6-24x magnification scopes and above - with 3 inches of spacing between scope rings to accommodate scopes with longer dimensions and larger adjustment housing
- Lightweight one-piece scope mount for mounting standard 1 inch diameter tube rifle scopes - with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount
- Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts
Monstrum Offset Cantilever Dual Ring Scope Mount | 1 inch Diameter | Flat Dark Earth
Monstrum
3662 ratings
More info
5
Product Features
- Dual ring scope mount for mounting standard 1 inch tube rifle scopes
- Mounts to any flat top Picatinny rail equipped rifle
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- Lightweight 6061 grade aluminum construction
- All Monstrum Tactical optics mounts come with a lifetime guarantee
Monstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount | 1 inch Diameter | Black
Monstrum
3566 ratings
More info
6
Product Features
- Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes
- Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
- Mounts to any flat top Picatinny rail equipped rifle
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings
Monstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount | 30 mm Diameter | Black
Monstrum
3244 ratings
More info
7
Product Features
- Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes
- Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
- Mounts to any flat top Picatinny rail equipped rifle
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings
Modkin Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail (1 inch, Set of 2)
Modkin
1355 ratings
More info
8
Product Features
- Double scope ring mount for Picatinny/ Weaver Rail (21mm).
- Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
- Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
- The ring is for most scopes which are in 1 inch / 25.4mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height: 2 inch)
- With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily.
Monstrum Slim Profile Series Offset Scope Mount with Integrated Level Bubble | 1 inch Diameter
Monstrum
57 ratings
More info
9
Product Features
- Dual ring scope mount available for standard 1 inch or for 30 mm tube scopes tubes
- Scope mounts come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target
- Mounts to any flat top Picatinny rail equipped rifle platform
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
Monstrum Scope Mount with 45 Degree Offset Micro Red Dot Mount | 30 mm Diameter | Compatible with Venom/Viper/Fastfire/Docter Standard Red Dots
Monstrum
18 ratings
More info
10
Product Features
- Dual ring scope mount for 30 mm tube scopes tubes with integrated 45 degree offset micro red dot mount
- 45 degree offset micro red dot mount allows for mounting of secondary red dot sight for use at closer ranges
- Micro red dot mount compatible with Vortex Venom/Viper, Burriss Fastfire 2/3, TRUGLO TRU-TEC, UTG Micro, and all Docter/Noblex footprint pattern red dots. Please refer to compatibility chart before purchasing.
- Mounts to any flat top Picatinny rail equipped rifle platform
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
