Attwood 4650-7 Tsunami T800 Aerator Pump, 800 GPH, 12-Volt, 3 ½-Inch Long Inlet, Threaded ¾-Inch Diameter Outlet, 29-Inch Wire
Attwood
2605 ratings
More info
1
Product Features
- Pump with innovative engineering and compact design provides the most reliable aeration in contained spaces such as livewell
- Powerful, reliable pump is rated for 800 gallons per hour (gph) output at design voltage 13.6 volts DC, or 750 gph at nominal voltage of 12 volts DC
- Features the most advanced materials, including premium-quality bearings and state-of-the-art brushes, alloys, and magnets
- Patented shaft seal prevents leaks caused by misalignment, caulked and tinned wiring eliminates wicking, prevents water damage, and resists corrosion
- Motor cartridge locks for secure placement, and unlocks for easy cleaning, maintenance, and replacement
- Has a ¾-inch diameter, 3 ½-inch-long inlet, and a threaded ¾-inch interior diameter outlet
- 12-volt pump connected with 29-inch wire
- Pumps fresh, oxygen-rich water to livewells and baitwells
- Uses less power for long pump and battery life
- Cooler-running motors, premium materials, watertight seals and waterproof wiring
- Cartridges are replaceable and interchangeable between bilge and aerator pumps
attwood 4622-6 Tsunami Replacement Motor Cartridge, for Model T800 Pumps, 800 GPH, 12-Volt, 29-Inch Wire
Attwood
588 ratings
More info
2
Product Features
- Easy-to-install direct replacement for the motor cartridge of model T800 Tsunami aerator and bilge pumps
- Reliable, self-contained unit that locks securely into the pump
- Installs easily, fits properly, and delivers outstanding performance
- Intended for use in the T800 models of the Tsunami Aerator Pump, Tsunami Dual Outlet Aerator Pump, and Tsunami Bilge Pump
- 12-volt Motor Cartridge installs with a 29-inch wire
- Boaters, boat-builders and dealers all want one thing from their bilge pumps: more power! And that's what the tsunami Series delivers with high-capacity, high-efficiency output.
- Tsunami cartridge pumps have replaceable/interchangeable motor cores
- Makes servicing simple and quick
Product Features
- Innovative engineering and compact design to provide the most reliable bilge pumping performance
- Powerful, reliable pump is rated for 800 gallons per hour (gph) output at design voltage 13.6 volts DC, or 760 gph at nominal voltage of 12 volts DC
- Features premium-quality bearings and state-of-the-art brushes, alloys, and magnets
- Patented shaft seal prevents leaks caused by misalignment, caulked and tinned wiring eliminates wicking, prevents water damage, and resists corrosion
- 12-volt pump has a barbed ¾-inch outlet and is connected with 29-inch wire
- Boaters, boat-builders and dealers all want one thing from their bilge pumps: more power! And that's what the Tsunami Series delivers with high-capacity, high-efficiency output
- Tsunami cartridge pumps have replaceable / interchangeable motor cores
- Makes servicing simple and quick
attwood 4653-7 Tsunami Series 800 GPH Fully Submersible Aerator Pump, White Finish, One Size
Attwood
156 ratings
More info
4
Product Features
- Sustains 800 GPH
- Fully submersible design ideal for use in a sea chest
- Inlet Length: 3-1/2 inch x ¾ inch
- Outlet Style: ¾ inch NPT
- Locking tab and base swivel allow for eight mounting positions
Attwood 4730-4 Heavy Duty 1,700 GPH Fully Submersible Boat Livewell/Baitwell Bilge Pump, White Finish
Attwood
70 ratings
More info
5
Product Features
- Sustains 1,700 GPH with 12 feet of head pressure
- Fully submersible design ideal for use in a sea chest
- Stainless steel motor shaft resists corrosion
- Locking tab and base swivel allow for eight mounting positions
- 3-year warranty
- Included components: End Product & Information
Attwood Sahara Automatic Bilge Pump S1100 Series - 12V - 1100 GPH
Attwood Marine
3 ratings
More info
6
Product Features
- Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing.
- Equipped with built in electronic controlled reed sensor system for easy fully automatic operation
- Built-in float switch! (No separate float switch is needed)
- Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies.
- Compact, automatic, fully submersible electric pump,Built-in float switch! (No separate float switch is needed)
Attwood 4606-7 Tsunami T500 Bilge Pump, 500 GPH, 12-Volt, Barbed ¾-Inch Diameter Outlet, 29-Inch Wire
Attwood
614 ratings
More info
7
Product Features
- Innovative engineering and compact design to provide the most reliable bilge pumping performance
- Powerful and reliable pump is rated for 500 gallons per hour (gph) output at design voltage 13.6 volts DC, or 450 gph at nominal voltage of 12 volts DC
- Features premium-quality bearings and state-of-the-art brushes, alloys, and magnets
- Patented shaft seal prevents leaks caused by misalignment, caulked and tinned wiring eliminates wicking, prevents water damage, and resists corrosion
- 12-volt pump has a barbed ¾-inch outlet and is connected with 29-inch wire
Attwood 4507-7 Sahara S750 Automatic Bilge Pump, 12-Volt, 1.5-Amp Draw, ¾-Inch Interior Diameter Hose, 29-Inch 16-Gauge Wire
Attwood
401 ratings
More info
8
Product Features
- Sahara bilge pumps include 36 inch lengths of 16-gauge tinned copper wire
- Wire is caulked to prevent water from wicking through insulation jacket
- All materials and components are state-of-the-art
- Permanent-magnet motor, stainless steel shaft, and steel-reinforced seal ensure powerful, durable performance
- S750 is sized for larger recreational boats
- Our most powerful 3/4 inch-outlet automatic pump 750 GPH at open flow, 625 GPH at 3.3 feet head, 3/4 inch hose outlet
Attwood 4202-7 Float Switch, For Bilge Pump, 12- and 24-V CE rated, 36-Inch Wire, 4 ¼ Inches L x 3 7/8 Inches W x 1 3/8 Inches H
Attwood
267 ratings
More info
9
Product Features
- Converts manual bilge pump into one that is controlled fully automatically
- Compact, low-profile design that mounts on any surface from horizontal up to a 24-degree angle
- Reliable mechanical switch that actuates pump motor at 2 inches water level
- 12- and 24-volt CE rated with a 36-inch wire connection
- Maximum amp draw is 12 amps (at 12-volt DC) or 6 amps (at 24-volt DC)
- Measures 4 ¼ inches L x 3 7/8 inches W x 1 3/8 inches H
- Sealed switch mechanism resists moisture, fume-ignition, and electrical shock
attwood 4201-7 Float Switch with Cover, for Bilge Pump, 12- and 24-V CE Rated, 4 ¼ Inches L x 3 7/8 Inches W x 1 3/8 Inches H
Attwood
187 ratings
More info
10
Product Features
- Converts manual bilge pump into one that is controlled fully automatically
- Compact design that mounts on any surface from horizontal up to a 24-degree angle
- Cover offers additional protection, and convenient test knob lets you can confirm switch is operable
- 12- and 24-volt CE rated with a 36-inch wire connection
- Maximum amp draw is 12 amps (at 12-volt DC) or 6 amps (at 24-volt DC)
- Measures 5 ¼ inches L x 3 7/8 inches W x 2 7/8 inches H
- Sealed switch mechanism resists moisture, fume-ignition, and electrical shock