Astro Pneumatic Tool 78620 Subaru Ball Joint Puller

711 ratings
More info
1
Product Features
- For difficult to remove, seized, rusted and/or corroded bolt-in Subaru ball joints
- Designed for easy use with vehicle on jack stands using a deep 24mm socket and impact or hand wrench
- Unique sliding pin non-rotating design removes ball joints in a single pulling motion without spinning the ball joint stud, reducing the chance of ball joint breakage
- For Subaru Baja 2003+, Forester 1998+, Impreza 1993+, Legacy 1990+, Outback 2000+ and more
- Or use included 5/8-18 thread adapter with any common slide hammer (arrives installed on tool, unthread to use alone)
Product Features
- Gearwrench's Ball Joint Separator is made for separating the ball joint from the spindle support arm on domestic and import front wheel drive vehicles
- Adjustable for different size ball joints
- Suitable for most cars and light trucks (not intended for use on 3/4 ton or 1 ton trucks)
- Works on ball joints from 1-1/8” to 2-1/8” and 30 to 56mm in size
- Slot is 7/8" wide by 1-1/4" Deep
Orion Motor Tech 5pc Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (BL06)

1656 ratings
More info
3
Product Features
- 1. ALL IN ONE FRONT END SERVICE KIT: Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case.
- 2. HARDENED ALLOY CONSTRUCTION: Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms.
- 3. UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES: The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.
- 4. PROFESSIONAL PORTABLE ABS CASE: The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place. Never miss out on a job or project from a misplaced tool.
- 5. ORION MOTOR TECH PROMISE: If any issues from our tools arise please don’t hesitate to contact us. We guarantee the quality of our tools and want to ensure you’re only getting the best. Because to do perform your best, you deserve the best, that’s our Orion Motor Tech Promise.
DURATECH 5-Piece Ball Joint Separator Set, Pickle Fork Tool Set, Tie Rod Removal Tool Set, 1-1/8", 15/16", 11/16", for Cars and Light Vans, with Suitcase

263 ratings
More info
4
Product Features
- This is a complete set of coverage, including five different SAE standard pieces. Forks are designed to interchange with either of the handles, making it easy to remove standard-size ball joints, tie rods, and pitman arms from a variety of cars and light trucks.
- The 40# steel used in these premium tie rod removers has been forged and heat treated for greater strength and durability, and chrome-plated surfaces protects them from corrosion, extending their service life.
- The knurled handles of these pitman arms separators provide sure grip for complete control of your work without slippage, and protect tool threads to extend tool lifetime and provide technician comfort.
- The set includes: (1) Track rod fork 11/16”; (2) Ball joint fork 15/16”; (3) Pitman arm fork 1-1/8”; (4) 7-7⁄8 knurled striking handle for use with conventional hammers; (5) 6-31⁄32" adapter handle for use with air hammer. A greater reach and penetration in places where space is limited and difficult to access.
- Tie rod removal tool set includes a sturdy blow-molded case for neat organization and rapid identification.
Orion Motor Tech Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks

123 ratings
More info
5
Product Features
- 1.EASY OPERATION: Use the ORION MOTOR TECH Ball Joint Press Tool Set with 4WD Adapter to effortlessly remove press-fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm.
- 2.UNIVERSAL COMPATIBILITY: Fits most American domestic and imported cars and light pickup trucks with press-fit type ball joints. Includes a 4WD adapter for service on 1967 - current 1/2 and 3/4 ton 4WD vehicles with the Dana 30 or 44 front axle (compatible with Ford, GM, Dodge, IHC, and Jeep vehicles).
- 3.PROFESSIONAL-GRADE DURABILITY: Constructed from heavy-duty forged steel with black-oxide finished adapters for maximum strength and longevity that resists rust and corrosion to endure years of heavy use.
- 4.ALL-IN-ONE TOOL KIT: 3x Receiving Tubes, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
- 5.PROTECTIVE CARRYING CASE: Each component is contained in a heavy-duty plastic carrying case with a handle for safe storage and quick organization. If you are not satisfied with this product or if you have any questions, please feel free to let us know.
Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks

9454 ratings
More info
6
Product Features
- ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.
- PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
- UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
- CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11” x 3” x 15” inch (27.9cm x 7.6cm x 38.1cm) plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include: 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
- ORION MOTOR TECH - We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any question, please feel free to let us know.
Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks (BL)

2577 ratings
More info
7
Product Features
- EASY OPERATION: Use the ORION MOTOR TECH Ball Joint Press Tool Set with 4WD Adapter to effortlessly remove press-fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm.
- UNIVERSAL COMPATIBILITY: Fits most American domestic and imported cars and light pickup trucks with press-fit type ball joints. Includes a 4WD adapter for service on 1967 - current 1/2 and 3/4 ton 4WD vehicles with the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC, and Jeep vehicles).
- PROFESSIONAL-GRADE DURABILITY: Constructed from heavy-duty forged steel with black-oxide finished adapters for maximum strength and longevity that resists rust and corrosion to endure years of heavy use.
- ALL-IN-ONE TOOL KIT: 3x Receiving Tubes, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
- PROTECTIVE CARRYING CASE: Each component is contained in a heavy-duty plastic carrying case with a handle for safe storage and quick organization. If you are not satisfied with this product or if you have any questions, please feel free to let us know.
DHA Heavy Duty Ball Joint Press Remover Installer Tool & U Joint Removal Tool Kit with 4x4 Adapters for Most 2WD and 4WD Car and Light Truck

390 ratings
More info
8
Product Features
- Heavy Duty Forged Ball Joint Remover Installer Kit is excellent for removal and installation of press-fit parts such as ball joints, U joint and brake anchor pins for Most 2WD and 4WD Cars and Light Trucks. Heat Treated C Clamp Puller can excellent press rusted parts effortlessly.
- Fit most American domestic and imported cars and light pickup trucks and Fit on Ford, GM, Dodge, IHC and Jeep vehicles
- This Ball Joint Tool be able to: Remove Upper/Lower Ball Joints, Install Upper/Lower Ball Joints, Remove/Install Brake Anchor Pin, Disassemble/Assemble Universal U Joints.
- Package include: 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
- Ball Joint Press Tool Four Wheel Drive Is Made of Strong Carbon Steel, Instruction In English Included ,Plastic Carrying Red Case Package.
ABN Universal Ball Joint Separator – Remover Tool for Separating Arms, Tie Rods, and Ball Joints on Cars, Trucks, ATVs

368 ratings
More info
9
Product Features
- Practical: The ABN Universal Ball Joint Separator – Remover Tool for Separating Arms, Tie Rods, and Ball Joints on Cars, Trucks, ATVs is designed specifically for quick and easy separation of a vehicle’s ball joint from the spindle support arm
- Versatile: Universal; For use on both American domestic and European imported/foreign vehicles; For cars, trucks, and even ATVs
- Durable: Constructed from commercial-strength cast steel with hardened steel pivot pin and jackscrew for regular shop use
- Easy to Use: Slip the forked end between the boot and metal attachment point, be sure the pivot finger is squarely on the threaded end, and tightening the bolt until you have a good amount of resistance; Tap the attachment point and or the finger with a hammer and tighten some more and tap again; When the stud comes loose, it will be all at once as the tool falls free and you will hear a “pop”
- Specifications: 1-1/8" and 2-1/8" (30mm and 56mm) maximum opening capacity; Accepts 3/4" sockets or wrenches; 4/5" (20mm) fork opening; 9/10” (48mm) adjustable height; Can be adjusted to 2 sizes for wider working areas and to accommodate various sizes and vehicles; Scissors-type design
RULLINE Universal Ball Joint Separator Adjusts from 1-1/2"to 1-7/8", Remover Tool Compatible with Separating Arms, Tie Rods, and Ball Joints on Cars, Trucks, ATVs

111 ratings
More info
10
Product Features
- 【Fit Most Cars】——The ball joint separator is adjustable for different size ball joints, it can be used on most press-fit ball joint applications. Max. opening range is 1/2 inch & 1-7/8 inch
- 【Function】——For separating the ball joint from the spindle support arm on domestic and import front-wheel drive vehicles
- 【Quality】——Ball joint separator features a strong all-steel construction and black-oxide coated pins, sturdy and durable for long lifetime.
- 【Adjustable】——2-Stage height adjustment feature uses a heat-treated steel pin thrust bolt and steel ball insert, allowing quick and easy height adjustment changes.
- 【Easy To Use】——The ball joint separator is easy to use, convenient and save your time and energy.