Kicker 46CXA8001 Car Audio Class D Amp Mono 1600W Peak Sub Amplifier CXA800.1
Kicker
924 ratings
More info
1
Product Features
- Kicker 46CXA8001 Car Audio Class D Amp Mono 1600W Peak Sub Amplifier CXA800.1
Skar Audio RP-350.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 350W
Skar Audio
634 ratings
More info
2
Product Features
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 388 Watts | RMS Power at 1 Ohm: 350 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 8 AWG Power & Ground Input Terminals for Maximum Current Flow
- Stable at 1 ohm | Remote Subwoofer Level Control Included
- Highly Efficient Heatsink Design allows for Maximum Reliability & Performance
CT Sounds CT-700.1D Compact Class D Car Audio Monoblock Amplifier, 700 Watts RMS
CT Sounds
109 ratings
More info
3
Product Features
- Car audio amplifier with 700 watts RMS power at 1-ohm load (14.4v); 380 watts RMS at 2-ohm load (14.4v); 200 watts RMS at 4-ohm load (14.4v); Frequency response: 0 to 320 Hz (Bass Knob Included)
- Small footprint and compact chassis makes this mono amplifier easy to install in any vehicle or car audio application; but don’t let the size fool you, this 700 watt amplifier absolutely pounds
- Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
- MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
- 4-way protection circuitry features high voltage, low voltage, over current, and high-temperature protection; sleep easy at night knowing your class d amplifier car audio is protected
ALPINE S-A60M 600 Watt RMS Mono Car Audio Amplifier Subwoofer Class-D+Bass Knob
Alpine
76 ratings
More info
4
Product Features
- (1) Alpine S-A60M 600 Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D. (1) Alpine RUX-KNOB.2 Remote Control Bass Knob For Select Alpine Amplifiers Amps. Specifications:
- Alpines Class D Amplifier Circuit. CTA-2006-B Power Rating: 330W RMS x 1 (4ohm, 14.4V 1% THD+N); 600W RMS x 1 (2ohm, 14.4V 1% THD+N)
- S/N ratio: >85dB (ref: 1W into 4 ohm), >105dB (ref: rated power into 4 ohm). THD+N 0.03% (ref 1W info 4 ohm). Frequency Response: 10Hz-400Hz (+/-3 dB). Damping Factor: > 1000
- Remote bass knob compatible (requires RUX-KNOB.2, sold separately)
Recoil DI600.1 Class-D Car Audio Mono-Block Subwoofer Amplifier, 1200 Watts Max Power, 2/4 Ohm Stable, Mosfet Power Supply, Remote Bass Knob Included
RECOIL
15 ratings
More info
5
Product Features
- Class-D Mono-block Subwoofer Amplifier, 1200 Watts Max Power, RMS 600 Watts x 1@2Ohm; RMS 350 Watts x 1@4Ohm.
- Featuring a high-speed MOSFET power supply, premium grade internal components, as well as 4-way protection circuitry, the amplifier will safely operate at the highest levels of performance for hours on end. Highly efficient heatsinks keep the amplifier cool with a sophisticated new look.
- Recoil mono amplifiers come with bass remote control. Use it to customize your bass on the fly with just a turn of a knob.
- You'll have full reign over your amplifier with the built-in user control panel, featuring a bass EQ, and variable adjustment tunings for gain level, low-pass filter, and subsonic filter.
- Dimensions: 7.48" x 5.90" x 1.77"
BOSS Audio Systems R1100M Riot Series Car Audio Subwoofer Amplifier - 1100 High Output, Monoblock, Class A/B, 2/4 Ohm Stable, Low/High Level Inputs, Low Pass Crossover, Mosfet Power Supply, Stereo
BOSS AUDIO
11636 ratings
More info
6
Product Features
- Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- Switchable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
- Variable Input Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Specs - Dimensions: 9.13” x 10.44” x 2.25”, Weight: 4.43 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 102 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 1 30 Amp ATO Blade
- Warranty - BOSS Audio Systems provides a 6 Year Platinum Online Dealer Warranty for purchases through Amazon.Com. We strongly encourage professional installation of this product to ensure proper functionality
Product Features
- 3,000 watts x 1 channel max power output
- 198 watts RMS x 1 channel at 4 ohms
- 396 watts RMS x 1 channel at 2 ohms
- Designed to power vehicle subwoofer
- slim to fit in any trunk
CT Sounds CT-1500.1D Compact Class D Car Audio Monoblock Amplifier, 1500 Watts RMS
CT Sounds
161 ratings
More info
8
Product Features
- Car audio amplifier with 1500 watts RMS power at 1-ohm load (14.4v); 850 watts RMS at 2-ohm load (14.4v); 450 watts RMS at 4-ohm load (14.4v); Frequency response: 0 to 320 Hz (Bass Knob Included)
- Small footprint and compact chassis makes this mono amplifier easy to install in any vehicle or car audio application; but don’t let the size fool you, this 1500 watt amplifier absolutely pounds
- Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
- MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
- 4-way protection circuitry features high voltage, low voltage, over current, and high-temperature protection; sleep easy at night knowing your class d amplifier car audio is protected
JBL Club A600 - Mono amplifier (600w X 1) amplifier with Remote Level Control
JBL
69 ratings
More info
9
Product Features
- Premium JBL Sound with 600W X 1
- Compact size
- High and low level input
- Variable crossover and bass boost
- Wired Remote Bass Control
Power Acoustik OD1-5000D Overdrive Series 5000 Watts Max 1 Ohm Mosfet Power Supply Class D Car Audio Monoblock Amplifier, Black
POWER ACOUSTIK
232 ratings
More info
10
Product Features
- 1 OHM STEREO: 1-ohm stable monoblock operation for MAX power
- DOUBLE POWER Bridge 2 monoblocks together for double power
- MOSFET POWER SUPPLY: Military-grade PCB with PWM MOSFET power supply
- OVERLOAD CIRCUIT PROTECTION: Direct short, thermal, and overload circuit protection
- SPECIFICATIONS: High/speaker level and low level/RCA input; 4g power wire and 8g speaker wire outputs; Variable 12dB high and low pass crossovers; 12dB bass boost increases low octave harmonics; Dimensions (L x W x H): 16.25 x 8.75 x 4 inches; Weight: 8.22 pounds
