Product Features
- 0-60 PSI Reading
- Right-Hand Threads
- Teflon Tape Already Installed
- Taprite Quality
- Fast and Easy To Read
Product Features
- 0-2000 PSI replacement gauge for a regulator requiring a left handed thread
- 0-2000 replacement gauge for regulators that required left hand thread on high pressure side.
- gauge already comes with plumbers tape
- Shipping rate is for the Continental US ONLY.
Regulator Gauge, 0-60 Taprite Brand, Right hand thread sold by Kegconnection
Taprite
62 ratings
More info
3
Product Features
- Replacement gauge for a Taprite regulator, right handed thread.
- Taprite, 0-60 psi gauge
- Low pressure gauge for Taprite Regulators
- Teflon taped when shipped
- Shipping rates shown are for the Continental USA only
Product Features
- Low pressure gauge (the top gauge) indicates output pressure to the keg
- The low pressure regulator allows for an adjusted pressure from 1 to 50psi, the maximum downstream delivery pressure will not exceed 50psi
- High pressure gauge (the side gauge) indicates CO2 tank pressure remaining
- Duck bill check valve helps prevent product back up into the regulator
- Assembled and Tested in the USA
Product Features
- At present we do not ship to California
- Dual pressure gauges - Co2 tank and keg pressure
- Integrated 5/16 barb outlet with check valve to prevent backflow
- 0-50 psi range, 60 lb and 2000 lb gauges
- Duck-bill shutoff, check valve, and a red easy adjustment cap
YaeBrew Dual Gauge Co2 Draft Beer Dispensing Regulator - Primary High Pressure Double Gauge Mixed Gas Co2 Regulator CGA320
69 ratings
More info
6
Product Features
- Output pressure gauge is 0-60 psi
- Tank pressure gauge is 0-2000 psi
- Mixed gas primary carbon dioxide regulator
- Outlet barb with shut-off
- Screw adjustment pressure
Product Features
- This regulator's two product design with two 5/16" barbs allows you to simultaneously dispense two beer kegs at the same pressure
- Dual pressure gauges allow you to monitor both the output pressure to the kegs and the volume of CO2 gas remaining in the cylinder
- Stylish black pressure gauges feature high-contrast red and white writing and sturdy rubber boots that help protect them from damage
- Large ergonomic handle makes it easy to make precise pressure adjustments between 0-60 PSI for greater dispensing control
- Durable chrome-plated brass body features a manual pressure release valve and an internal pressure relief valve that releases at 55-65 PSI
YaeTek Argon CO2 Regulators Gauges Gas Welding Regulator CGA580 Mig Tig Weld 0-4500PSI / 0-10BAR
Yaemart Corportation
166 ratings
More info
8
Product Features
- Material: brass bodyting
- Argon gauge 0 to 4500PSI.
- CGA580 fitting.
- FEMALE 5/8" and MALE 9/16" Outlet
- 100% Brand New Compatible with Miller Lincoln Tig Mig Weld
Argon CO2 Regulators Gauges Gas Welding Regulator cutting Regulator CGA580
Blawicat
132 ratings
More info
9
Product Features
- 1, Designed for MIG & TIG applications and provide accurate regulation of gas flow.
- 2, Features: 2" dual-gauges for easy reading.
- 3, Safe Design: Accurate measurement of gas. Internal safety pressure relief design.
- 4, Specifiction:Brass regulator body; CGA580 fitting, FEMALE 5/8" and MALE 9/16" Outlet.
- 5, Wide Use: Plastic adjustment knob for smooth "easy touch" flow settings; Ideal for commercial, industrial and laboratory applications.
Product Features
- AT PRESENT WE DO NOT SHIP TO CALIFORNIA
- Tap two kegs at the same time and control the pressure to each
- 0-60 gauges measure pressure to each keg
- 0-3000 gauge measures CO2 in tank
- Nonadjustable "shut down" blows off at 55-65 PSI