Product Features
- The R2-500X1 full-range class-D mono amplifier (1.9" x 6.8" x 8.5") is packed with features and performance to deliver power and bass on demand with 500 Watts of RMS power
- Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 300 Watts x 1 @ 4Ω OR 500 Watts x 1 @ 2Ω)
- Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass
- Designed for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music
- Famous Rockford Fosgate build quality with a full 1-year warranty
HiLetgo 2pcs TDA2050 Mono Audio Amplifier Module Digital Mono Amplifier Board AMP DC/AC 5-24V Output 5W-120W for Speaker
HiLetgo
7 ratings
More info
2
Product Features
- TDA2050 Mono Audio Amplifier Module
- TDA2050 Digital Mono Audio Amplifier Board
- Input voltage: DC/AC 5-24V Output power: 5W-120W
Skar Audio RP-1200.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1200W
Skar Audio
2903 ratings
More info
3
Product Features
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150<
- Stable at 1 ohm | Remote Subwoofer Level Control Included
- Highly Efficient Heatsink Design allows for Maximum Reliability & Performance
Alpine S-A60M Mono Digital Subwoofer Amplifier - 600 Watts x 1 @ 2-Ohms & 330 Watts x 1 @ 4-Ohms
Alpine
397 ratings
More info
4
Product Features
- 330 watts RMS x 14 ohms
- preamp and speaker-level inputs
- variable bass boost
- The amp includes preamp- and speaker-level inputs,you can installin almost any vehicle, even one with a factory radio.
Product Features
- Delivers up to 2.5 Watts into 4-8 ohm impedance speakers
- Very efficient Class-D controller amp
- Built in thermal and over-current protection
- Fixed 24dB gain, onboard trim potentiometer for adjusting input volume.
- Output is "Bridge Tied" meaning the output pins connect directly to the speaker pins, no connection to ground
Hifonics ZG-1800.1D Zeus Gamma ZG Series Amp (Monoblock, 1,800 Watts Max, Class D)
deejayled
444 ratings
More info
6
Product Features
- 1,800 watts max
- 900 watts x 1 at 2 ohms
- 450 watts x 1 at 4 ohms
- Frequency response: 10 Hz to 500 Hz
- Class D for high efficiency with big power in a small footprint
Bluetooth-Compatible Amplifier Board, PEMENOL TWS DC 7-24V 100W Mono Audio Power Amplifier Module with Box Matching Function Support AUX/Bluetooth-Compatible/USB for DIY Electronic Kit Car Store Home
PEMENOL
24 ratings
More info
7
Product Features
- TWO INDICATOR: PEMENOL Bluetooth power amplifier module features two indicators that provide clear status information. The work indicator shows whether the module is operating properly, while the TWS indicator indicates whether the module is in TWS mode for easier control and operation. This thoughtful design makes it simple to use the module and enjoy high-quality music.
- TWS MODE: PEMENOL power amplifier features box matching function, which allows for easy separation of left and right channels using two Bluetooth power amplifier modules of the same model. Enjoy a more authentic music or movie experience without any wired connections. Additionally, the PEMENOL power amplifier module boasts high fidelity sound quality and supports multiple audio input methods, making it the perfect choice for your private audio and video space.
- KNOB FUNCTION: Power amplifier module features a multi-functional knob design, allowing for adjustable volume, audio playback/pause, and next track switching. It can also be long-pressed for power on/off and triple-pressed to enter TWS mode, enhancing your audio experience. Additionally, the finely manufactured knob operates smoothly and comfortably, enabling easy access to all functions and maximizing your enjoyment of music and movies.
- 4 AUDIO INPUTS: Bluetooth power amplifier module boasts 4 audio inputs - Bluetooth, AUX, USB flash drive, and USB sound card. Connect to your device wirelessly via Bluetooth, or to a TV, computer or audio device via the AUX input. USB flash drive and USB sound card inputs are also supported, allowing for easy playback of music files or computer audio. With multiple input options, you can easily choose the one that best suits your needs for a high-quality audio experience.
- WIDE APPLICATION: PEMENOL Bluetooth power amplifier module, equipped with TWS function, is a powerful audio device widely used in DIY Bluetooth audio and other fields. Its excellent sound quality provides high-quality music and movie experience at home or in the office. Easy to install and use, it's a practical choice for music lovers and casual users alike. Choose PEMENOL for a high-quality, user-friendly, and practical audio equipment.
BOSS Audio Systems R1100M Riot Series Car Audio Subwoofer Amplifier - 1100 High Output, Monoblock, Class A/B, 2/4 Ohm Stable, Low/High Level Inputs, Low Pass Crossover, Mosfet Power Supply, Stereo
BOSS Audio Systems
12752 ratings
More info
8
Product Features
- Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- Switchable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
- Variable Input Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Specs - Dimensions: 9.13” x 10.44” x 2.25”, Weight: 4.43 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 102 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 1 30 Amp ATO Blade
- Warranty - BOSS Audio Systems provides a 6 Year Platinum Online Dealer Warranty for purchases through Amazon.Com. We strongly encourage professional installation of this product to ensure proper functionality
30W TWS BT Amplifier Board, PEMENOL DC 9-24V 3A Audio Amplifier Module Support APP Control Modify BT Name and Password AUX BT 5.3 USB Audio Input for DIY Speaker Store Home
PEMENOL
3 ratings
More info
9
Product Features
- 【30W POWER AMPLIFIER MODULE】PEMENOL BT power amplifier board is a small power device with an output power of 30W. It's sufficient for various applications such as small speakers, ẉịreleṣs speakers, and personal headphone amplification, meeting daily needs effectively. Its compact design and convenient BT connectivity give it an advantage in lightweight and portable scenarios.
- 【TWS FUNCTION】BT amplifier module features TWS (True Wireless Stereo) capability, enabling seamless ẉịreleṣs stereo connection. You can pair two amplifier modules to create a truly immersive audio experience. With simple setup, you can effortlessly achieve dual-channel sound. You have the flexibility to place these two modules in different locations for a wider audio distribution.
- 【APP Control】Audio amplifier module supports convenient control through a dedicated mobile app. Users can easily modify the BT password, customize the BT name, and even have the freedom to disable cumbersome prompt sounds as they wish. The intelligent design enhances user experience, providing greater comfort and flexibility, and offering a plethora of personalized options for using audio equipment.
- 【THREE AUDIO INPUT METHODS】BT amplifier board features diverse audio input options, including convenient BT connectivity, the traditional AUX audio interface, and USB playback capability, catering to a wide range of user needs. This flexibility makes it an ideal choice for multi-scenario applications, providing a more convenient and enjoyable audio experience.
- 【WIDE APPLICATION】PEMENOL versatile BT module has a wide range of applications, suitable for home and DIY BT speakers, among other fields. For those who love DIY or Bluetooth-compatible speakers, this module is the ideal choice for creating personalized BT speakers. You can design unique audio devices based on your preferences and needs. Regardless of the field, this BT module will provide reliable wireless connectivity and high-quality audio experience for your projects.
Recoil DI600.1 Class-D Car Audio Mono-Block Subwoofer Amplifier, 1200 Watts Max Power, 2/4 Ohm Stable, Mosfet Power Supply, Remote Bass Knob Included
RECOIL
41 ratings
More info
10
Product Features
- Class-D Mono-block Subwoofer Amplifier, 1200 Watts Max Power, RMS 600 Watts x 1@2Ohm; RMS 350 Watts x 1@4Ohm.
- Featuring a high-speed MOSFET power supply, premium grade internal components, as well as 4-way protection circuitry, the amplifier will safely operate at the highest levels of performance for hours on end. Highly efficient heatsinks keep the amplifier cool with a sophisticated new look.
- Recoil mono amplifiers come with bass remote control. Use it to customize your bass on the fly with just a turn of a knob.
- You'll have full reign over your amplifier with the built-in user control panel, featuring a bass EQ, and variable adjustment tunings for gain level, low-pass filter, and subsonic filter.
- Dimensions: 7.48" x 5.90" x 1.77"