SUNLU 3D Printer Filament Bundle, SUNLU PLA META Filament 1.75mm, 100% Neatly Wound PLAMETA Filament 2kg, 8 Colors, 0.25kg Spool, 8 Packs, Black+White+Grey+Blue+Green+Red+Yellow+Pink
SUNLU
121 ratings
More info
1
Product Features
- 【Good printing effect, 100% Bubble-Free】- New upgraded Universe series 3D printing filament PLA-Meta strictly guarantees neat lineup, no knotting, strictly guarantees ±0.02mm wire diameter difference, 100% zero bubbles. Ensure high efficiency printing, say goodbye to plugging.
- 【Good fluidity, Strong resistance】- SUNLU 3D filament PLA-Meta is 1.5 times more fluid than ordinary PLA, About 1 times stronger than ordinary PLA and PLA+ in terms of impact resistance. The smoothness of the material discharge is excellent, reducing plugging, and the printed models are resistant to dropping.
- 【Lower printing temperature, lower consumption】 - PLA meta filament melting point is 155℃-170℃, Recommended printing temperature is 180℃-200℃, lower than PLA 3D printing filament. Lower melting point and printing temperature, means more energy saving, reduce printer loss and extend the life of 3D printer. It can also greatly reduce clogging, drawing, and ensure stable feeding and stable printing.
- 【New hue, Good Glossiness】- SUNLU upgraded 3D filament has a new hue to give you a new visual effect. PLA-Meta filament has good adhesion and super strong interlayer bonding, and the surface of the consumable has good glossiness, soft color and warm color, making 3D printed models more glossy.
- 【Wide compatibility, After-sales guarantee】- PLA Meta is not only suitable for all models of FDM 3D printers, but also for SUNLU filament dryer box S1/ S1 Plus/ S2 full series. It is widely used, suitable for printing crafts, artwork and industrial design samples, etc. In addition, SUNLU has up to 1 year after-sales service and guarantees to reply emails within 24 hours, please feel free to contact us if you need.
ERYONE Silk Dual Color Filament PLA 3D Printer 1.75mm, +/-0.03mm, Coextrusion Filament PLA Shiny Filament 1kg(2.2lbs), Blue Green
ERYONE
95 ratings
More info
2
Product Features
- 1.【Silk Dichromatic Filament】ERYONE dual-color silk filament is made from two individual colors, extruded into one filament strand.You can change the visible color by rotating the color-blending filament to different orientations.
- 2.【High Accuracy Silk Filament】The diameter of the blended dual color silk filament is 1.75mm with a tolerance of +/-0.03mm. Dichromatic PLA filament feed smoothly and constantly without clogging the nozzle or extruder making you a smoothly printing & better surface.
- 3.【No Warping Multicolor Filament】Perfect winded silk blended color pla filament,tangle-free before unopened, no stringing and warping.Universal compatibility with most FDM 3D printers and 3D Pens.
- 4.【Strong Layer Adhesion】This silk PLA filament has perfect first layer adhesion to reduce warpage, shrinkage, curl and print failure.1.75mm Dual color silk 3D printer PLA Filament is no bubble,strong layer adhesion make the printing parts stronger.
- 5.【Silk Effect Filament】When printed with this 3D printing silk dual color filament, it creates a really unique look on your parts! Multicolor silk filaments can output with incredible pearlescent and gorgeous silk surface.
OVERTURE PLA Filament 1.75mm PLA 3D Printer Filament, 1kg Cardboard Spool (2.2lbs), Dimensional Accuracy +/- 0.03mm, Fit Most FDM Printer (White 1-Pack)
OVERTURE
16540 ratings
More info
3
Product Features
- 【Clog-Free & Bubble-Free】-- Designed and manufactured with clog-free patent to guarantee a smooth and stable printing experience with these PLA refills. Complete drying for 24 hours before packaging and vacuum sealed with desiccants in a transparent bag
- 【Less-tangle and Easy to Use】Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking; Larger spool inner diameter design makes feeding smoother
- 【Dimensional Accuracy & Consistency】advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA filaments of 1.75 mm diameter, Accuracy +/- 0.03 mm; 1 kg spool (2.2lbs)
- 【Cost-effective and Wide Compatibility】With over 8 years'3D filaments R & D experience, thousands tons of filaments output every month, Overture is capable of manufacturing all kinds of filaments in large scale with premium quality, which contribute to Overture filament cost-effective and reliable for most common 3D printers, such as MK3, Ender 3, Monoprice FlashForge and more
- 【LIFE-TIME GUARANTEE】No matter when or why you need to replace or refund we will help! No risk to give us a chance to prove us, overture, are your reliable 3d filaments /accessories/3d printer/3d pen supplier
3D Printer Silk Rainbow Multicolor PLA Filamentt 1.75mm 1KG Multi Color Printing Materials Gradually Changing Color PLA Rainbow Mulitcolor Multicolored Metallic Color Gradient Filament CC3D
Hangzhou zhuopu new materials technology co.,LTD
8532 ratings
More info
4
Product Features
- No polishing needed, printing at a high detail results in a beautiful finish.
- Highlight silk pla filament multicolored color.
- Nice shiny Metallic Special Rainbow Multi Color Gradient
- Industrial & Scientific > Additive Manufacturing Products > 3D Printing Supplies > 3D Printing Filament
- The change from one color to another is random.
ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Grey
ANYCUBIC
1822 ratings
More info
5
Product Features
- 【𝐀𝐜𝐜𝐮𝐫𝐚𝐜𝐲 & 𝐂𝐨𝐧𝐬𝐢𝐬𝐭𝐞𝐧𝐜𝐲】 Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance ±0.02mm, which making filament outflow smoother, came out homogeneous. The low shrinkage, stable printing dimensions make the fusion between the layers was very good to obtain an even better bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
- 【𝐍𝐞𝐚𝐭 𝐒𝐩𝐨𝐨𝐥 & 𝐏𝐫𝐞𝐦𝐢𝐮𝐦 𝐐𝐮𝐚𝐥𝐢𝐭𝐲】 The 3D Printing PLA filament was neat on the roll and leaves the spool easily without any crossed turns. Resulting in less thread pulling and twisting, no clogging, super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used whilst resisting warping and also providing the glossiest finish. Without a single jam and adhesion issue which meeting your demands for printing freely
- 【𝐂𝐥𝐨𝐠-𝐅𝐫𝐞𝐞 & 𝐁𝐮𝐛𝐛𝐥𝐞-𝐅𝐫𝐞𝐞】 Designed and Manufactured with Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Larger spool inner diameter design makes feeding smoother
- 【𝐄𝐜𝐨-𝐅𝐫𝐢𝐞𝐧𝐝𝐥𝐲 & 𝐖𝐢𝐝𝐞 𝐂𝐨𝐦𝐩𝐚𝐭𝐢𝐛𝐢𝐥𝐢𝐭𝐲】 Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperature, even does not need a heated bed. No odor, no pollution and non-toxic during the printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market, such as Prusa, Makerbot, MK3, Ender 3, CR 10, Kobra, Mega, Chiron, Monoprice FlashForge and more
- 【𝐅𝐢𝐥𝐚𝐦𝐞𝐧𝐭 𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧】 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melt through the nozzle. Note: When installing and changing filament, we highly suggest to preheat the nozzle firstly to reduce the nozzle block risk
PLA 3D Printer Filament, SUNLU Neatly Wound PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, Fit Most FDM 3D Printers, Good Vacuum Packaging Consumables, 1kg Spool (2.2lbs), 330 Meters, PLA Black
SUNLUGW
17529 ratings
More info
6
Product Features
- ① 【Super Neat Filament Spool】SUNLU 3D printer filament product line is equipped with an excellent self-developed neat winding device, 100% neat rate, no clogs, making filament easier to use.
- ②【SUNLU PLA 3D Printer Filament】PLA filament is the most basic, the most used filament, no clogs, no bubbles, no tangle, SUNLU PLA filament has good layer adhesion, very easy to use.
- ③【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, making it suitable for almost all 1.75mm FDM 3D printers.
- ④【Filament Spool Diameter】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers.
- ⑤【Recommend Settings】We recommend printing the PLA filament at nozzle temperature of 200-230°C, bed temperature of 50-65°C, and printing speed of 50-100mm/s.
- ⑥【SUNLU Main Products】FDM 3D Printer, 3D Printer Accessories, 3D Printer Filament, Filament Dryer, 3D Pen, 3D Printer Resin, LCD 3D Printer, Resin Curing Box.
SUNLU 3D Printer Filament，PLA Filament Bundle, 1.75mm PLA Filament Muticolor, High Compatiblity,250G Spool,8 Rolls, Black+White+Grey+Burly Wood+Purple+Blue Grey+Grass Green+Pure Yellow
SUNLUGW
4599 ratings
More info
7
Product Features
- 【8 Rolls of 0.25kg 1.75mm PLA Filament, Multiple Color Choices】8 rolls of 250g SUNLU 1.75mm PLA filament.Color:Black+White+Grey+Burly Wood+Purple+Blue Grey+Grass Green+Pure+Yellow.The design of 250g PLA filament is convenient for customers with multiple color needs.Especially for multi-nozzle 3d printer users and 3d pen users.
- 【SUNLU Toughness-enhanced PLA Filament】 SUNLU premium PLA filament offer the advantage of incredible ease of 3d printing.SUNLU PLA filament,optimized print quality,high purity with low shrinkage and superb interlayer adhesion.Meet your needs for 3d printing projects on functional parts with higher toughness.
- 【High Precision +/- 0.02mm Tolerance PLA filament】: 1.75mm PLA 3D filament(Tolerance Level : ± 0.02mm).0.25KG 3d printer filament reel,perfect roundness and very tight diameter tolerance,approximately 68m of PLA filament on each spool ease of use,minimal warping,no clogging,no bubbles.Increase your 3d printing objects delicacy.
- 【No Clogging, no Bubbles and Good Adhesion】Better flow of SUNLU no plugging premium 1.75mm PLA filament.It has consistent diameter & roundness,less stringing and warping,strong layer adhesion.Article-free and impurity-free.No impurities,no clogged.Recommended PLA Filament Extrusion/Nozzle Temperature 200-230℃.
- 【High Compatiblity & Vacuum Pack PLA Filament】Compatible with 99% FDM 3D printers (with heated beds) and 3D pen.Vacuum packed neatly arranged SUNLU PLA filament, provide better printing result.Environmental protection,250g PLA filament is made from starch raw materials derived from renewable plant resources.
- 【Neatly Wound Filament 】SUNLU has a professional production line with strict control of neatly lined up lines to avoid knots during printing.Completely mechanical wire winding and strict manual checks to ensure neat lines with few kinks, avoiding possible breaks.
Flashforge 3D Printer Filament Mulitcolor PLA 1.75mm, 3D Printing Filament 1kg Spool-Dimensional Accuracy +/- 0.02mm, Environmental Friendliness, no Smoke and no Odor (Burnt Titanium, PLA)
Zhejiang Flashforge 3D Technology Co., Ltd.
1663 ratings
More info
8
Product Features
- Be harmless to human, be friendly to environment;no smoke or unpleasant smell when printing
- Match up with PVA, printing models which are hollow-out and have large inclination angles
- Details such as sharp corners and edges print well and PLA printed objects will generally have a glossier look and feel
- Flashforge 3d printing filament apply to all types of FFF 3D printers;eg Flashforge Finder,Creator pro etc;no need heating raft, low demand to printers
3D Printer Filament Bundle Multicolor, SUNLU ABS Filament 1.75mm, Durable ABS 1.84kg, 0.23kg Spool, 8 Packs, Individually Vacuum Packed, 8 Colors, Black+White+Transparent+Blue+Green+Red+Orange+Yellow
SUNLUGW
1205 ratings
More info
9
Product Features
- ①【Pack of 8 Spools, 1.84kg in Total, 0.23kg per Spool,】PETG 3D printer filament bundle multicolor, 8 colors in total: Black+White+Transparent+Blue+Green+Red+Orange+Yellow
- ②【Small Volume】SUNLU small size PETG 3D printing filaments, users can easily have multiple colors, small volume PETG filament 1.75mm, more convenient to storage.
- ③【Super Neat Filament Spool】SUNLU filament product line is equipped with an excellent self-developed neat winding device, 100% neat rate, making filament easier to use.
- ④【ABS Strong 3D Filament】SUNLU ABS 3D filament is a type of strong and durable filament, ideal for printing durable items or functional parts that require higher heat resistance.
- ⑤【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
- ⑥【Printing Recommend Settings】For ABS 3D printer filament, we recommend printing at a nozzle temperature of 240-270°C, bed temperature of 80-120°C, printing speed of 50-100mm/s.
OVV3D PLA Filament 1.75mm, Tri-Colors 3D Printer Filament, Rainbow PLA Filament Bundle, Coextrusion 3D Filament with Silk PLA Color Change, 3D Printing Filament +/-0.02mm, 200g X 4 Spool
OVV3D
309 ratings
More info
10
Product Features
- 【Tri-Colors PLA Filament Bundle】Different from normal color change rainbow PLA filament, every inch of this magic 3d filament is made of three colors-Red Blue Green, Red Blue Yellow, Orange Blue Green, Red Purple Gold. Therefore, you will easily get all colors, even for very small prints. Different prints will present different effects. Enjoy your 3d printing creations.
- 【Silk PLA Filament】We specialize in silk PLA filament so that the surface of this tri-color 3d printing filament is very smooth and shiny. What you 3d printing out will be as glossy as in the pictures, no exaggeration.
- 【Easy to Print】The diameter tolerance of this 1.75 PLA filament is +/- 0.02mm. More stable diameter tolerance of 3D printer filament would give you smoother 3D printing. High toughness PLA filament 1.75mm cause you have room for 3D printing imagination.
- 【Upgrade PLA Raw Material】The raw material comes from Europe, and it has been developed and modulated to show a charming gloss on the PLA. No jamming, no bubble, no tangle, and no layer line, just silk color changing PLA filament.
- 【ECO Packaging】Instead of plastic spools, we use paper spool and paper box to package PLA filament. Protecting the environment is the responsibility of each of us. The PLA filament is vacuum packed with high quality desiccant to keep dry.
