4 Sheet 12'' x 30'' Aluminized Heat Shield Adhesive Backed Thermal Barrier Insulation Wrap Adhesive Heat Shield Thermal Barrier Foil Tape Heat Resistant Tape Automotive Exhaust High Temp Protection
Sumind
11 ratings
More info
1
Product Features
- Ample for Your Use Needs: you will receive 4 sheets of heat barriers adhesive, adequate in quantity to satisfy your daily use and replacement demands, you can also adjust the length as needed to meet your various projects
- Appropriate Size for Using: the heat barrier is about 12 x 30 inches/ 30 x 75 cm, 0.032 inch in thickness, large enough for you to cut into different length or sizes, to satisfy your diverse DIY projects needs
- Quality Material Selection: the adhesive backed aluminized heat barrier is made of glass fiber fabric, aluminized layer and adhesive material, elastic and wear resistance, heat insulation, high temperature resistance, waterproof and strong adhesion, hard to corrosion, serving you for a long time
- Versatile Performances: the aluminized heat shielding mat can be applied to different clean surfaces, widely applicable for safety panels, firewalls, cables, sealed air boxes, fuel lines, engine covers, hoses, doors, bulkheads and other places
- High Temperature Resistance: the adhesive backed heat blanket is strong enough to withstand direct heat up to 500 Celsius degree and radiant heat up to 500 Celsius degree, its reflecting surface can shield heat and reflect 95% of the heat, keeping the back of the heat shield at normal temperature, to prevent high temperature damage, and provide protection to effectively protect parts
LEDAUT 2" x 50' Titanium Exhaust Heat Wrap Roll for Motorcycle Fiberglass Heat Shield Tape with Stainless Ties
LEDAUT
5651 ratings
More info
2
Product Features
- 2"X50' Titanium Wrap with (pack of 16) Stainless Steel(304) Locking Ties.
- Titanium heat shield sleevevis made from crushed volcanic rock.
- High resistance to abrasions, oil spills, temperatures and vibration breakdown.
- The exhaust heat wrap tape can withstand 1400F direct/2000F radiant heat.
- The thermal heat wrap reduces heat under hood up to 50% and improving car And motorcycle Performance
WISAUTO Aluminized Heat Shield Thermal Barrier Adhesive Backed Heat Blanket (12'' X 24'')
WISAUTO
1061 ratings
More info
3
Product Features
- ✅【Suitable Size】the aluminized fiberglass sheet measures 12 x 24 inch, thickness: 0.032''(0.8MM). large size to use in daily life, you can simply trim the sheet into wanted shape or size to satisfy your various projects
- ✅【High temperature resistance】: this adhesive backed heat barrier can withstand high temperature, its reflective surface can still screen off the heat and provide utmost protection, effectively protect parts and components, like painted surfaces and plastic parts, from damaging radiant heat. Reflective temperature of 600F, withstands radiant heat up to 1000F.
- ✅【Convenient to apply】: innovatively designed with adhesive composite on its back, the heat shield protection barrier cover can be easily wrapped or laid on to any desired surfaces with a professional-like finish, make it clean and tidy
- ✅【Reliale material】 : this heat shield protection barrier cover is made of glass fiber fabric with an aluminized outer facing, durable and reliable to use, can provide ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime
- ✅【After-Sale Guarantee】—- We offer lifetime service for self adhesive heat barrier shield if you order it from our store. Any issue about this backed aluminized heat barrier sheet, please feel free to contact us.
SICCOMA Black Aluminum Foil Tape 2 in x 65 Feet 3.94 Mil Hot & Cold Shield Resistant Black Foil Tape HVAC Sealing & Patching Hot Cold Air Duct Tape for Pipe, Metal Repair, HVAC, Air Ducts, Insulation
ZHONGHENG
25 ratings
More info
4
Product Features
- APPLICATION: Our heavy duty black foil tapes are good to use for industrial/home air duct, HVAC systems, AC units, heaters, vents, metal finishing, electronics, automotive, recreational vehicle, construction, pipe patching, sealing, seaming,cold & heat shielding and so on.
- FEATURES: Our aluminum black foil duct tape is capable of resisting flames, moisture / vapor, UV degradation, cold and hot weather, blocking lighting spills/ leakages on heat generating equipment (projectors, light cans, or barn doors), providing a durable bond at low and high temperatures.
- INSTALLATION: The black coated foil tape is extremely strong adhesive but still easy to remove without any residue, easy to cut, tear and peel during installation. Pressure sensitive black foil tape enables to be fit on corrugated or irregular corners and joints. Very high bonding for plastic, ceramic, concrete, copper/brass and other metals.
- SIZE: 2 inch in width, 65 feet in length,3.94MIL in thickness. It's ideal for most outdoor and indoor metal repairs, air duct repair, patching and sealing. Can be used in most weather conditions.
- PACKAGE INCLUDES: 1 Roll of High Quality, Heavy Duty Self-Adhesive Black Aluminium Foil Tape. Good for home or industrial use.
Thermo-Tec 14002 Thermo-Shield Radiant Heat Protection, 1.5" x 15' Roll
Thermo-Tec Products
167 ratings
More info
5
Product Features
- Reflects over 90% of radiant heat, adding life to the starter and assuring reliable starts
- The adhesive-backed composite construction tape can easily be wrapped around the hose or wire to make a clean, professional appearance
- Protect parts from over 90% of radiant heat up to 2000 degrees Fahrenheit
- Made in the USA
- Made in the USA
CARDI 1" x 16' Titanium Exhaust Heat Wrap for Motorcycle Heat Shield Tape with 4 Stainless Ties and Gloves
CARDI
6 ratings
More info
6
Product Features
- 【DIMENSIONS】The Length of the titanium exhaust wrap is 16', and the width is 1''. Different from other exhaust wrap tape, our product thickness is 0.06''. In addition We prepared 4PCS 11.8" stainless steel zip ties and a pair of rubber gloves for installation.
- 【MATERIALS】This motorcycle heat shield tape is made of a different material than fiberglass, we extract it from natural basalt. Compared to traditional fiberglass can withstands 1400F direct/2000F radiant heat. Our exhaust wrap does not contain glue, so it is not easy to produce smoke when used.
- 【ADVANTAGE】Compared to other fiberglass heat shield Tape, our weaves are tighter and therefore have a longer service life. The thickness of most products on the market is 0.04" but ours is 0.06". More importantly, our products are not easily damaged by heat, Some products change color when exposed to heat for a long time.
- 【INSTALLATION】First spraying exhaust wrap with water as you work can make installation easier and also reduce the amount of fibers. Then make one full initial wrap around the pipe, flush with flange or edge of pipe. Every 5 or 6 passes around pipe, use your hands or steel yip ties to twist the wrap more tightly onto the pipe.
- 【TIPS】Clean exhaust system - clean headers, exhaust pipes, mufflers from grease and dirt. Failure to do so may result in a fire. Anything over 1/4” may over insulate pipes. It may be necessary when wrapping around bends to exceed 1/4” and that is fine. Just be sure to stick to the 1/4” overlap for other parts of the exhaust system.
BBTO Heat Shield Adhesive Backed Aluminized Fiberglass Heat Sheet Protection Barrier Cover Aluminized Heat Shielding Mat for Hose and Auto Use Heat Insulation Sheet (Gold,24 x 48 Inch)
BBTO
1346 ratings
More info
7
Product Features
- Large size to use: the aluminized fiberglass sheet measures approx. 60 x 120 cm/ 24 x 48 inch, large size to use in daily life, you can simply trim the sheet into wanted shape or size to satisfy your various projects
- High temperature resistance: this adhesive backed heat barrier can withstand high temperature, its reflective surface can still screen off the heat and provide utmost protection, effectively protect parts and components, like painted surfaces and plastic parts, from damaging radiant heat
- Convenient to apply: innovatively designed with adhesive composite on its back, the heat shield protection barrier cover can be easily wrapped or laid on to any desired surfaces with a professional-like finish, make it clean and tidy
- Multiple applications: the aluminized fiberglass sheet is a helpful addition in your life, can be applied to any cable, wire, plastic components, painted surfaces, doors, hoods for added heat protection, suitable for automotive parts, home repair, computer repair and more, finished edges to avoid fraying
- Reliable material: this heat shield protection barrier cover is made of glass fiber fabric with an aluminized outer facing, durable and reliable to use, can provide ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime
Sporacingrts 2" x32.8'(10M) Gold Adhesive Backed Heat Barrier Tape,Glassfiber Heat Shield Reflective Tape Wrap Roll,Compatible with Car Intake Pipe,Engine Bay etc.
Sporacingrts
402 ratings
More info
8
Product Features
- Material:Made of High Quality Glass fiber
- Some typical uses include: firewall, hoods, hoses, doors and other please that you want to control radiant heat. Attention:Do not use it on the exhaust pipe.
- Self-Adhesive Backed make it easy to apply and remove.
- Package Include:2"x29.5'(9M) Exhaust Pipe Wrap
- Withstands Continuous Temperatures Up To 660 degrees Fahrenheit.
Exhaust Wrap Black 1" x 16' Roll for Motorcycle Fiberglass Heat Shield Tape with 4PC Stainless Ties (black)
PACEWALKER
818 ratings
More info
9
Product Features
- 【HEAT SHIELD】: The heat pack can reduce the heat under the hood by up to 50%.
- 【Easy to Install】Use rubber gloves when installing. Make sure to soak in water before installation. Also, cover your skin as this stuff can cause itching if you wear it on your arms and hands.
- 【Superior Quality】: The packaging is designed to be stronger and more durable than most packaging for improved thermal performance and reliability.
- 【Withstand High Temperature】: Can withstand up to 2000 degrees Fahrenheit. Great for reducing heat under the hood to protect your vital engine components.
- 【Satisfaction Guarantee】: 100% refund if not satisfied. We always support our high-quality products and services, if you have any unsatisfactory experience with our products, please feel free to contact us, we will provide you with friendly and convenient support.
A-Team Performance - Heat Shield Tape - with PSA Ultra-Lightweight Self-Adhesive Heat Resistant Heat Reflective Thermal Tape 1.5" x 15' - Roll Adhesive Backed Heat Barrier
A-Team Performance
546 ratings
More info
10
Product Features
- Lightweight Insulating Tape — Uses woven glass fiber heat resistant matting and one mil aluminized materials making it an ultra-weightless cool tape
- Reflective Solution — A thermal insulating roll tape convenient for application on cables, hoses, wires, fuel lines, and other surfaces. It can also be used to wrap wirings, seal air boxes, cover seams, and secure panels.
- Withstand Radiant Heat — It can sustain and screen off direct heat of 400 degrees Fahrenheit and radiant heat of up to 2000 degrees Fahrenheit
- Efficient Application — The strong adhesive back composite makes application quick and easy with a guaranteed long-lasting seal
- Package Inclusion — 1 x A-Team Performance Lightweight Aluminized Heat Shield Barrier Reflective Cool Insulating Tape Strong Self-Adhesive Seal 1.5" x 15' Roll
