10 Best 12 Volt Bilge Pumps

Product Features

• Included Components: Rule 02 Higher Capacity Bilge Pump - 1500 Gph, 5678 Lph, 12V
• Material Type: Canvas
• Sport Type: Boating

Product Features

• A genuine Rule product, don't settle for anything less
• More pumping capacity and more exclusive design features than any comparable competitive pump at a lower cost
• 1-1/8 inch (28. 6 millimeter) hose barb discharge outlet
• Compact, efficient, long-life motors, able to run dry for short periods
• Silent and vibrationless operation, stainless steel shaft, completely submersible, rust and corrosion resistant
• 3 Year Warranty

Product Features

• Flow Rate: 1100 GPH; Voltage: 12 VDC
• Flow: 1100 gallons per hour or 5000 L / hour, Head: 13 Ft (4mts), Outlet Dia. 1-1/8" (29mm)
• Typical Uses: Suitable for hydraulic systems fed with cold water—used in line to be fed by gravity or pressure
• Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, Etc
• Built for the harsh marine environment, are suitable to withstand the most adverse condition. The water-cooled engine ensures a long service life

Product Features

• 4 Year Warranty
• 12 volt, 500 gallons per hour
• Current draw: 2 Amp, (3 max) Fuse Size: 5 Amp Hose Outlet: 3/4"
• Dimensions: Height 4.25" x Width 2.77" (fits standard strainer bases)

Product Features

• Flow Rate (GPH): 1100GPH; Volt: 12V; Current(A): 3.8A; Head(M): 3.0M
• Wire Lead(M): 1m; Outlet Diameter: 29mm/ 1.14 Inch (1-1/8"); Width: Approx. 81mm
• Built-in float switch! (No separate float switch is needed)
• No power use until pump is activated by internal float switch (when water level rises)
• Equipped with built in electronic controlled reed sensor system for easy fully automatic operation

Product Features

• Flow Rate: 1100 GPH; Voltage: 12 VDC
• Flow: 1100 gallons per hour or 5000 L / hour, Head: 13 Ft (4mts), Outlet Dia. 1-1/8" (29mm)
• Typical Uses: Suitable for hydraulic systems fed with cold water—used in line to be fed by gravity or pressure
• Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, Etc
• Built for the harsh marine environment, are suitable to withstand the most adverse condition. The water-cooled engine ensures a long service life

Product Features

Product Features

• Fully submersible electric 12V bilge pump, high efficient, high capacity output 1100GPH
• Is water rising in the hull of your boat or getting into the basement of your house
• Small size, high efficiency, low current and low noise
• Ideal for fishing boats, cruise ship, yachts, etc.
• Impact resistant ABS housing, stainless steel shafts, rust proof and corrosion resistant Easy-to-clean snap lock strainers

Product Features

• Flow Rate : 1100GPH; Volt: 12V; Head: 3.0M
• Wire Lead(M): 1m; Outlet Diameter: 29 mm/(1-1/8)Inch; Width: Approx. 81mm
• Built-in float switch! (No separate float switch is needed)
• No power use until pump is activated by internal float switch (when water level rises)
• Equipped with built in electronic controlled reed sensor system for easy fully automatic operation

Product Features

• The Amarine-made submersible bilge pumps are tough enough for any bilge.
• High Flow: for use from 22-234L / Min (1.32-14.04 cubic meters / hour)
• Small size, high efficiency, low current (low cost switching power supply supporting); to achieve a small size perfect combination of high flow
• Unique automatic "discharge" function can bear the long-term continuous operation under nearly congestion condition
• Impact resistant ABS housing. Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies